
90PX056XMA replacement saw chain for Makita 16 inch 36 volt cordless
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a 56-drive-link Oregon 90PX loop in 3/8 low-profile pitch with .043 gauge, sized for 16-inch bars on Makita 18V X2 (36V) LXT cordless saws. The narrow .043 kerf and low-profile cutters draw less power than the standard 91PX system, which helps a battery saw hold RPM in small limbs and light felling. It also replaces 90PX056XMK. It suits homeowners, arborists and landscapers running a 16-inch battery Makita who want a low-drag chain rather than a heavier standard-kerf loop.
In stockReturn policy
Owners of 16-inch Makita X2 saws report this loop fits and cuts as expected, with the low-profile chain letting the battery saw keep speed in limbs and light felling. Some note it dulls sooner than heavier chain in dirty wood.
This is a replacement saw chain loop, model 90PX056XMA, for Makita 16 inch 36 volt cordless saws. It fits 16 inch bars on 18 Volt X2 (36 Volt) LXT Lithium-Ion Brushless Cordless Chain Saws, and it also replaces 90PX056XMK.
The chain is an Oregon 90PX, built for small, low-powered saws. Its .043 gauge takes less power while cutting a narrower kerf, which lets the saw hold higher RPM, and it needs less power from the saw than the standard 91PX cutting system.
It fits any bar stamped 3/8LP or 3/8 Low Profile with .043 (1.1 mm) and 56 drive links; a 90 stamp on the drive link with 56 drive links also identifies a match. The chain sharpens at 30 degrees with an 11/64 inch file. It is a low-kickback chain that meets the kickback performance requirement of ANSI B175.1-2012 and of CSA Standard Z62.3.
It checks today's price at every store, compares the alternatives and answers in about a minute.