Is the Kobra S1 Max worth it over the smaller S1?

If you need the space, yes. The build volume is 350×350×350mm, which Anycubic calls 174% larger than the S1, and the Max adds full enclosure and 65℃ chamber heating. The S1 is cheaper and smaller if large ABS or PC parts are not your goal.

Can it really print 16 colors?

Yes, but only with four ACE 2 Pro units. The Combo includes one ACE 2 Pro, so out of the box you get four colors. Each extra unit adds four more.

What filaments can the enclosed chamber handle?

ABS, ASA, PC, PA and carbon-fiber blends, thanks to the 65℃ chamber, 350℃ hotend and 120℃ bed. PLA and PETG also print fine, though the enclosure is not needed for them.

How long does a color change take?

Anycubic lists about 56 seconds per filament change. On a print with hundreds of swaps that adds hours, so multi-color models are slow compared with single-color work.

The Kobra S1 Max, one ACE 2 Pro, a spool holder, signal cable, four Teflon tubes and two power cords. It arrives 95% assembled; Anycubic says about 10 minutes to first print, though owners report longer unpacking.

The best new price found is $799.00 at Anycubic US as of November 4, 2026, across 3 stores. Anycubic runs frequent site sales, so check the price history before buying.

Where is the Anycubic Kobra S1 Max Combo cheapest?

At ANYCUBIC3D-US, for $799.00, as of our latest check.

What do buyers say about the Anycubic Kobra S1 Max Combo?

Rated 4.5 out of 5 from 179 ratings. Buyers like: Great print quality and perfect first layers; Easy, quick setup out of the box; Large print volume and high speed. Common complaints: Nozzle clogged on an early print; Filament change during printing takes a long time.

Where can I buy the Anycubic Kobra S1 Max Combo?

3 stores we checked sell it, including ANYCUBIC3D-US, eBay, Amazon.

Anycubic Kobra S1 Max Combo: lowest price $799.00 at ANYCUBIC3D-US, 3 stores compared

What reviewers say

Rated 4.5 out of 5 from 179 ratings. Owners like the print quality, first layers and quick setup, and value the enclosed chamber for engineering materials. Complaints center on clogs, slow color changes and the slicer.

Pros

Great print quality and clean first layers
Easy, fast setup out of the box
Large volume and high speed
Heated chamber and hotend open up ABS, ASA and PC

Cons

Nozzle clogged on an early print
Filament changes during a print take a long time
Slicer needs more features
Filament backup did not work as expected

From Anycubic US

350×350×350mm³ print volume, 174% larger than the S1
Fully enclosed CoreXY system with 65℃ active chamber heating
350℃ high-temperature hotend with hardened steel nozzle
Maximum 16-color printing by combining four ACE 2 Pro units
Handles engineering-grade filaments like ABS, ASA, PC, PA and carbon-fiber blends
95% pre-assembled; unbox and print in about 10 minutes

Materials: Hardened steel nozzle and extruder gears; titanium alloy throat tube; PEI spring steel build plate
Guarantee: 1-year warranty for 3D printers; 30-day after-sales guarantee
Returns: 14-day no reason return
Shipping: Free express shipping; ships in 24 hours; 3D printers and accessory packs are shipped separately
Packs: Combo options: 4 colors (one ACE 2 Pro), 8 colors (two ACE 2 Pro), 16 colors (four ACE 2 Pro); optional 4KG filament bundles in random, PLA Special, PETG, PLA H
In the box: Kobra S1 Max, ACE 2 Pro, Spool Holder, Signal Cable, Teflon Tube (4pcs), Power Cord (2pcs)