Creality K1 Max 3D Printer
4.4Best price now
$549.00at B&H Photo-Video-AudioObserved Nov 1, 2026, 6:33 PM
Compared across 3 stores. Prices are checked against each store and labelled with when.
Compared across 3 stores. Prices are checked against each store and labelled with when.
Deal.ai may earn a commission when you buy through these links. It never affects our recommendations. Learn more
In stock
In stock
In stockSold by CREALITY STORE
Also available at
Lowest price we've seen: $549.00 on Nov 1 at Creality USA. Tracked across 3 stores since Nov 1.
Creality K1 Max 3D printer is designed for efficiency, boasting a maximum speed of 600mm/s and 20000mm/s² Acceleration, which is 12 times faster than a regular Fused Deposition Modeling 3D printer. Perfect for professionals and beginners. The K1 Max boasts an impressive printing size of 300×300×300mm, allowing for multiple models to be printed simultaneously, significantly increasing printing efficiency. Additionally, its print volume to printer size ratio can reach up to 25.5%, the biggest compared with similar-sized printers. The 1μm resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. And K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alter you when an error occurs. It also supports real-time monitoring and creates time-lapses for sharing. Furthermore, The strain sensors in the heatbed generate an accurate leveling mesh for auto compensation. K1 Max is assembled and calibrated before shipment, and it offers a boot-up quick guide and allows self-test with one tap. So, users can print right out of the box. The Creality K1 Max offers hands-free auto leveling, the strain sensors in the heatbed deliver hands-free leveling, while the AI LiDAR scans the bed tilts at a million points for more precise leveling. Its heatbed heats to 60℃ in just the 90s. Ensuring perfect prints every time without the hassle. A new ceramic heater encircling the hotend can melt various filaments instantly. The dual-gear direct drive extruder and titanium alloy heartbreak ensure 32mm³/s full-blast feeding flow in up to 300℃. The freshly printed model is cooled rapidly by two fans, one on the print head with directional air ducts, and another in the build chamber. The model hardens before any stringing and warping could happen.