

Prices are checked against each store and labelled with when.
The AXTQH 2 Channel Relay Module is a small copper-clad laminate board that switches two high-current loads from a low-level control signal. It accepts high or low level triggers, draws about 5 mA idle and 2-4 mA to trigger, and handles up to 30 A at DC 30 V or AC 250 V. That current rating is high for a bare relay board, so it suits switching pumps, heaters, lamps and solenoids from a PLC or microcontroller. Rivals in this class often switch 10 A and need a separate driver; this one is simpler to wire but gives you no opto-isolation or DIN rail, and the supply voltage must match the relay coil.
In stockSold by langnuodianziReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
A two-channel relay module for PLC automation equipment.
Each channel switches on a high or low level trigger, drawing 2 to 4 mA to trigger and 5 mA when idle. The module handles a load current of 30A, with a maximum load of DC 30V or AC 250V.
The board measures approximately 70 x 70 x 20 mm and mounts on an approximately 67 x 67 mm footprint. The module power supply must be DC and must match the working voltage of the relay.
It checks today's price at every store, compares the alternatives and answers in about a minute.




