Will it work with my Bafang motor?

Only if your controller uses CANBUS, as on most newer Bafang mid-drives. Older UART controllers need a UART display instead.

Is it worth buying over a cheaper display?

A genuine Bafang unit matches your motor's firmware and connectors, which avoids compatibility headaches. Generic displays can work but sometimes need wiring changes.

Does it support 52V batteries?

Yes. Bafang rates it for 36V, 48V and 52V systems, so it reads voltage correctly on a 52V pack.

Typically just the display and its cable with the CANBUS connector. Mounting hardware and manuals vary by seller, so confirm before ordering.

Can I change speed limits or power settings with it?

It offers basic settings such as wheel size and units. Deep power tuning usually needs a programming cable and software, not this display.

Prices swing with seller and stock, and replacement displays often drop during seasonal e-bike sales. Compare current listings rather than assuming a fixed price.

Bafang DPC-245 CANBUS Display

Last price we saw

$76.99at eBay, last seen Oct 30

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Our take on the Bafang DPC-245 CANBUS Display

The Bafang DPC-245 is a CANBUS e-bike display for Bafang mid-drive and hub motor systems running 36V, 48V or 52V. It shows speed, battery level, assist level, trip distance and error codes, and it is the stock display on many Bafang M-series and newer CANBUS drive units. It is a replacement or upgrade part, so it only works with a CANBUS Bafang controller, not the older UART systems. Pricing varies widely by seller; check the current listing for the exact figure.

Best forReplacing a failed stock display on a CANBUS Bafang e-bike