Does ABS need an enclosed printer?

In practice, yes. ABS shrinks as it cools, so an enclosure keeps the chamber warm and stops parts from warping or splitting between layers. Open-frame printers can print it, but results are less consistent.

Is it safe to print indoors?

ABS gives off fumes while printing, more than PLA or PETG. Print in a ventilated area or with a filtered enclosure, and keep the space away from children and pets during long prints.

What is a refill spool?

It is filament wound without a spool. You mount it on a reusable Bambu Lab spool before printing. If you do not already own one, a spooled version is the simpler choice.

Which printers does it fit?

It is 1.75 mm filament, so it works with Bambu Lab X1, P1P, P1S and A1 series printers and most other 1.75 mm FDM printers that can reach ABS temperatures.

How should I store it?

Keep it sealed or in a dry box with desiccant. ABS absorbs moisture, and wet filament causes popping, rough surfaces and weak layers. Dry it before use if it has been exposed to humid air.

What is it best used for?

Mechanical parts, brackets, housings and other prints that face heat or load. For decorative pieces or simple prototypes, PLA is easier and cheaper to print.

Bambu Lab 3D Printer Filament ABS-White-Refill

Best price now

$19.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Bambu Lab 3D Printer Filament ABS-White-Refill

Best price now

$19.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $19.99 at Walmart on Nov 10.

Our take on the Bambu Lab 3D Printer Filament ABS-White-Refill

Bambu Lab ABS is a 1.75 mm engineering filament for FDM printers, sold as a refill spool in white. ABS gives parts higher heat resistance and toughness than PLA, and Bambu rates it for print speeds up to 300 mm/s with low warping and strong layer bonding. It suits makers printing mechanical parts, brackets and enclosures that see heat or stress. Compared with PLA it is harder to print: it needs an enclosed printer and good ventilation because of fumes and warping.

Best forFunctional and mechanical partsHeat-resistant printsEnclosed-printer ownersBambu Lab X1, P1 and A1 users

Pros

Higher heat resistance and toughness than PLA
Rated for speeds up to 300 mm/s
Low warping for ABS, with strong layer bonding
Vacuum-sealed with desiccant
Refill format cuts spool waste

Cons

Needs an enclosure to print reliably
Gives off fumes; ventilation matters
More prone to warping and splitting than PLA
Refill has no reusable spool included

Bambu Lab 3D Printer Filament ABS-White-Refill prices at every store

WalmartNew
In stockSold by FuturologyReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$19.99+ $13.50 shippingChecked Nov 10
Visit Walmart

About the Bambu Lab 3D Printer Filament ABS-White-Refill

This is white ABS 3D printer filament from Bambu Lab, sold as a refill. It is made for consistent diameter and precise dimensional accuracy. It is meant for both functional prototypes and final parts.

It prints with low warping and good layer bonding. It is optimized for high-speed printing up to 300 mm/s and gives stable extrusion and a smooth surface finish.

The filament is vacuum-sealed with desiccant to protect it from moisture. Detailed print settings are included on the spool or package.

Brand: Bambu Lab
Material: ABS
Color: White
Type: Refill
Compatibility: Bambu Lab X1, P1P, P1S and A1 series; most 1.75 mm FDM printers
Print speed: Optimized for up to 300 mm/s
Packaging: Vacuum-sealed with desiccant
Storage: Keep in a dry, cool place
Print settings: Included on the spool or package

Specifications

color: WhiteSource

Questions and answers

Does ABS need an enclosed printer?: In practice, yes. ABS shrinks as it cools, so an enclosure keeps the chamber warm and stops parts from warping or splitting between layers. Open-frame printers can print it, but results are less consistent.
Is it safe to print indoors?: ABS gives off fumes while printing, more than PLA or PETG. Print in a ventilated area or with a filtered enclosure, and keep the space away from children and pets during long prints.
What is a refill spool?: It is filament wound without a spool. You mount it on a reusable Bambu Lab spool before printing. If you do not already own one, a spooled version is the simpler choice.
Which printers does it fit?: It is 1.75 mm filament, so it works with Bambu Lab X1, P1P, P1S and A1 series printers and most other 1.75 mm FDM printers that can reach ABS temperatures.
How should I store it?: Keep it sealed or in a dry box with desiccant. ABS absorbs moisture, and wet filament causes popping, rough surfaces and weak layers. Dry it before use if it has been exposed to humid air.
What is it best used for?: Mechanical parts, brackets, housings and other prints that face heat or load. For decorative pieces or simple prototypes, PLA is easier and cheaper to print.
Where is the Bambu Lab 3D Printer Filament ABS-White-Refill cheapest?: At Walmart, for $19.99, as of our latest check.