Does it work on non-Bambu printers?

Yes. It is standard 1.75 mm PLA, so any FDM printer that takes 1.75 mm filament can use it with a generic PLA profile.

What nozzle and bed temperatures should I use?

Print around 190 to 230 °C at the nozzle and 35 to 65 °C on the bed, following your printer's PLA settings.

Is PLA food safe or dishwasher safe?

No. FDM prints have layer gaps that trap bacteria, and PLA warps well below dishwasher temperatures.

Can I print outdoor parts with it?

Not for long. Sun and heat deform PLA, so use PETG, ASA or ABS for outdoor use.

Does it need a heated bed or enclosure?

No. PLA prints on unheated beds and needs no enclosure, though a heated bed helps adhesion.

How should I store the spool?

Keep it sealed with a desiccant when not in use. PLA absorbs moisture slowly, and wet filament prints with pops and rough surfaces.

Bambu Lab Filament Carft 3D Printer PLA Basic-Orange

Best price now

$19.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Bambu Lab Filament Carft 3D Printer PLA Basic-Orange

Best price now

$19.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $19.99 at Walmart on Nov 10.

Our take on the Bambu Lab Filament Carft 3D Printer PLA Basic-Orange

Bambu Lab PLA Basic is a 1.75 mm PLA filament for FDM 3D printers, sold on a spool in a range of solid colors. PLA is the easiest common material to print: it runs at low nozzle temperatures, needs no heated enclosure, and gives smooth, glossy surfaces with little odor. Bambu Lab tunes its own printer profiles for this filament, so it prints reliably on Bambu machines and works on most other 1.75 mm printers with a generic PLA profile. It is a general-purpose choice rather than a specialty material: for heat resistance or flexibility, PETG, ABS or TPU do more.

Best forBeginners printing their first modelsEveryday prototypes, toys and household partsBambu Lab printer owners who want matched profilesClean display pieces that need a smooth finish

Pros

Easy to print with low nozzle temperatures
Smooth, consistent surface finish
Cardboard spool that is easy to recycle
Wide printer compatibility at 1.75 mm
Reliable diameter tolerance for fewer jams

Cons

PLA softens in hot cars or direct sun
Brittle compared with PETG or ABS
Limited to a single solid color per spool
Not suited to outdoor or load-bearing parts

Bambu Lab Filament Carft 3D Printer PLA Basic-Orange prices at every store

WalmartNew
In stockSold by FuturologyReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$19.99+ $13.50 shippingChecked Nov 10
Visit Walmart

What reviewers say

Owners of Bambu Lab printers report clean, consistent prints with few failed first layers, and many praise the tidy winding and smooth finish. Complaints center on PLA's limits in heat and on the cardboard spool in some AMS setups.

What people mention

Print qualityPraisedOwners say layers bond well and surfaces come out smooth with little stringing.
Ease of usePraisedBeginners report successful prints on the first try using standard PLA settings.
Spool handlingMixedSome users find the cardboard spool catches or drags in certain feeders and re-spool it.
Heat resistanceCriticisedPrinted parts soften or warp when left in a hot car or direct sunlight.
Color accuracyMixedA few buyers say the finished color looks slightly different from the product images.

About the Bambu Lab Filament Carft 3D Printer PLA Basic-Orange

This is a spool of Bambu Lab PLA Basic filament in orange. It is made from PLA and measures 1.75 mm in diameter. The filament is made for 3D printing and crafting projects.

It is intended for easy printing and gives smooth finishes with consistent performance. It works with a wide range of 3D printers that use 1.75 mm filament.

Brand: Bambu Lab
Series: PLA Basic
Material: PLA
Diameter: 1.75 mm
Color: Orange
Compatibility: 3D printers that use 1.75 mm filament

Specifications

color: OrangeSource

Questions and answers

Does it work on non-Bambu printers?: Yes. It is standard 1.75 mm PLA, so any FDM printer that takes 1.75 mm filament can use it with a generic PLA profile.
What nozzle and bed temperatures should I use?: Print around 190 to 230 °C at the nozzle and 35 to 65 °C on the bed, following your printer's PLA settings.
Is PLA food safe or dishwasher safe?: No. FDM prints have layer gaps that trap bacteria, and PLA warps well below dishwasher temperatures.
Can I print outdoor parts with it?: Not for long. Sun and heat deform PLA, so use PETG, ASA or ABS for outdoor use.
Does it need a heated bed or enclosure?: No. PLA prints on unheated beds and needs no enclosure, though a heated bed helps adhesion.
How should I store the spool?: Keep it sealed with a desiccant when not in use. PLA absorbs moisture slowly, and wet filament prints with pops and rough surfaces.
Where is the Bambu Lab Filament Carft 3D Printer PLA Basic-Orange cheapest?: At Walmart, for $19.99, as of our latest check.