Compared across 2 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Bambu Lab H2C is a large-format FDM printer built around a hotend swap system called Vortek. It can print up to six colors or seven materials in a single job with purge waste as low as 532g, far less than single-nozzle color changers. A closed-loop servo extruder, 350°C nozzles, a 65°C heated chamber and full filament-path AI error detection put it in the engineering-materials class, alongside machines like the Prusa XL and Bambu's own X1 series. It suits makers who print multi-material parts and high-temperature filaments and want a 330 x 320 x 325 mm build volume in a closed frame.
In stockReturn policy
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $2,639.00 on Nov 13 at Amazon. Tracked across 1 store since Nov 13.
The Bambu Lab H2C is an FDM 3D printer for multi-color and multi-material printing. Its Vortek system swaps only the hotend, so one print can use six colors or seven materials. Purge waste can be as low as 532 g.
The printer has six replaceable hotends plus a seventh nozzle that can be used for support material or an additional color. Each hotend can be dedicated to specific filaments and stores filament information automatically. The next time you load that material, it is matched to the correct hotend. Because only the hotend is swapped, the build volume is not significantly reduced.
A closed-loop servo extruder delivers 10 kg of force, which is 70% more than stepper motors. AI error detection covers the full filament path. The active heated chamber reaches 65°C, and the nozzles reach 350°C for engineering materials. Parallel-connected AMS units let a single print use up to 24 materials. TPU ball joints can be printed into multi-color parts.
