
Bambu Lab H3C 9 Toolhead 3D Printer with 24 Color AMS Printing
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The H3C is Bambu Lab's third-generation enclosed CoreXY printer, built around a Swaptek 9-tool changer. Each of the nine PrintTools carries its own hotend and filament path, so material swaps take as little as 6 seconds with purge waste down to 0.038 g. This bundle adds four AMS 2 Pro units plus the 9-slot AMS 3H for up to 24 colors in one print. It suits print farms, product designers and makers who want full color with little waste, and it competes with multi-tool machines like the Prusa XL on tool count and speed rather than on price.
In stockReturn policy
Bambu Lab H3C 3D Printer Bundle With 4 AMS 2 Pro Units: Up to 24-Color Printing
The Bambu Lab H3C is Bambu Lab's first third-generation 3D printer, and this bundle pairs it with four AMS 2 Pro filament systems for serious multi-color and multi-material work. The H3C is an enclosed CoreXY printer built around the Swaptek™ 9-tool changer . It has nine PrintTools, each with its own hotend and filament path, so it switches materials in as little as 6 seconds with purge waste as low as 0.038 g. The included 9-slot AMS 3H works alongside the four AMS 2 Pro units for up to 24 colors in one print. With a 330 × 320 × 325 mm build volume, a 350 °C nozzle, a 65 °C heated chamber, and speeds up to 1,400 mm/s, it's made for print farms, product designers, and makers who want full color without the waste. Shop the H3C 24-color bundle at Swing Design .
Key Features
Swaptek™ 9-Tool Changer With Almost No Purge Waste
Most multi-color printers push out a long purge every time they change filament. The H3C gives each color its own PrintTool and hotend, and Active Pre-Heat brings the next tool up to temperature before it's needed. A tool change takes as little as 3.4 seconds and a full material switch as little as 6 seconds, with purge waste as low as 0.038 g. That means faster multi-color prints, far less wasted filament, and smaller purge piles. You can even mix nozzle sizes in one print using optional hotends.
Up to 24 Colors With 4 AMS 2 Pro Units Plus the AMS 3H
The H3C's 9-slot AMS 3H is sealed, RFID-enabled, and has a built-in 2-slot dryer that reaches 85 °C. Add four AMS 2 Pro units, each with 4 airtight, RFID-enabled slots and drying up to 65 °C, and you get Bambu Lab's maximum H3C setup. The four AMS 2 Pro units feed PrintTool No. 1 and eight AMS 3H slots stay available, for up to 24 colors (4 × 4 + 8). Keeping 24 spools loaded, sealed, and dry means less swapping and more time printing. With Bambu PLA Palette filament, CMYKW color mixing can produce over 180 shades from just five base colors.
Engineering-Grade Materials and a Heated Chamber
With a 350 °C max nozzle temperature, a 120 °C heated bed, and active dual-zone chamber heating to 65 °C, the H3C handles PLA, PETG, TPU, ABS, ASA, PC, PA, PPS, PPA, and carbon and glass fiber blends. All nine PrintTools ship with 0.4 mm hardened steel hotends. A dedicated 2.85 mm PrintTool prints soft TPU down to 75A, and the FlexFeed servo extruder delivers up to 40 mm³/s of hotend flow.
Fast, Smart, and Fully Automatic
The H3C prints at up to 1,400 mm/s with 25,000 mm/s² acceleration. Before every print it automatically handles PrintTool docking, offset compensation, and bed leveling. Built-in 1080p live-view and toolhead cameras power AI monitoring that catches spaghetti failures, purge-bin jams, and clogs. A door sensor, filament run-out detection, nozzle clumping detection, and power-loss recovery protect long jobs, and an H11 HEPA filter with activated carbon handles fumes.
Supported Filaments
Everyday materials: PLA, PETG, PCTG, TPU, EVA, PE, PP and PHA
Support materials: PVA, BVOH and support filament
Engineering materials: ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA and PPS
Fiber-reinforced materials: Carbon and glass fiber filled PLA, PETG, ABS, ASA, PA, PC, PET, PPS and more
What You Can Make with the Bambu Lab H3C
<li class="break-words whitespace-pre-wrap [&>ul]:whitespace-normal [&>ol]:
It checks today's price at every store, compares the alternatives and answers in about a minute.