This is an official, manufacturer-original high-flow hotend from Bambu Lab, with a 0.4 mm hardened steel nozzle. It is made for the H2, X2 and P2 series.
On the H2 and P2 series, the heating assembly is designed so the thermal and electronic parts of the hotend separate easily. To remove or install the hotend, you unlock the latch.
The melt zone of the high-flow nozzle is optimized to raise volumetric speed, which can cut print time by up to 30%. Larger models and prints with heavy infill save the most time. The extrusion is designed to stay consistent at high speed, for sharp edges and smooth surfaces.
- Brand
- Bambu Lab
- Type
- High-flow hotend, official original spare part
- Compatibility
- Bambu Lab H2, X2 and P2 series
- Nozzle size
- 0.4 mm
- Nozzle material
- Hardened steel
- Quick change
- Latch release for the H2/P2 series hotend
- High-flow nozzle
- Basic PLA 40 mm³/s, PLA Matte 48 mm³/s, PETG HF 32 mm³/s
- Standard nozzle
- Basic PLA 24 mm³/s, PLA Matte 28 mm³/s, PETG HF 24 mm³/s (0.4 mm, for comparison)
- Time savings
- Up to 30% shorter print time
- Filaments
- Basic PLA, PLA Matte, PLA Basic Gradient, PLA Silk+, PLA Silk Dual Color, PLA Silk, PLA Metal, PLA Marble, PLA Sparkle