
BTF-LIGHTING FCOB CCT COB LED Strip Tunable 2700K-6500K DC12V 2X16.4FT Total 32.8FT 640LED/m CRI 90+ Flexible High Density Dimmable LED Light
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a two-reel tunable-white COB LED strip: 32.8 ft total (2 x 16.4 ft) at 640 LEDs per meter on a 10mm black PCB, running on 12V DC. It tunes from warm 2700K to cool 6500K and dims through a separate CCT controller, so brightness and color temperature are set independently. The dense chip-on-board array gives a continuous, dot-free line of light that beats standard 5050 or 3528 SMD strips for evenness, and CRI 90+ keeps colors looking natural. It suits cabinet, cove, mirror and accent lighting indoors; it is IP30 non-waterproof, so it is not for bathrooms, outdoors or wet areas.
In stockShips from the UK · duties may applyReturn policy
Owners of BTF-LIGHTING COB strips generally praise the smooth, even output and the wide warm-to-cool tuning range. Common complaints center on the extra controller and power supply needed and on the strip being strictly indoor-only.
This is a flexible FCOB LED strip on a black PCB, supplied as two 16.4 ft lengths for a total of 32.8 ft. It has 640 LEDs per meter and a color rendering index of 90+. The strip is 10 mm wide and has an IP30 rating for indoor use.
The chip-on-board design creates a dense, uniform light without dark spots in the middle compared with 5050 SMD and 3528 SMD strips. Color temperature is tunable from 2700K warm white to 6500K daylight. Brightness and color temperature can be controlled independently with a standard CCT dimmer, and the strip is dimmable.
The strip can be cut at the solder spots and reconnected with 3-core ribbon cable and connectors. It has a 4-pin 3-wire plug at each end, one female and one male, and supports end-to-end series connection. A self-adhesive backing is included, and the mounting surface should be clean and dry before installation. The package includes connectors, clips and wire, but no power supply or controller.







