
BTF-LIGHTING IP66 FCOB CCT COB LED Strip
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a 16.4 ft tunable-white COB LED strip on a black PCB, running on 12V DC with 640 LEDs per meter. It shifts smoothly between 2700K warm white and 6500K daylight and dims through a separate CCT controller. The IP66 sleeve makes it usable where splashes happen, though not underwater. The dense COB array gives a continuous line of light with no visible dots, which is its main edge over standard SMD strips. It suits under-cabinet, bathroom and utility lighting where a single run of adjustable white is wanted.
In stockShips from the UK · duties may applyReturn policy
This is a 16.4 ft COB LED strip on a black PCB with 640 LEDs per meter, powered by DC 12V. Its color temperature tunes from warm white at 2700K to daylight at 6500K, and brightness and color temperature are adjusted independently with a standard CCT dimmer, which is sold separately.
The strip is 10mm wide and flexible, with a protective outer sleeve that gives it an IP66 rating: it resists rain and splashes but not prolonged submersion. It has a self-adhesive backing, and the installation surface should be cleaned and dried thoroughly beforehand. It is intended for indoor use, including kitchens, bathrooms away from direct water contact, and laundry rooms with occasional humidity.
The strip can be cut at the marked solder spots and reconnected with 3-core ribbon cable and connectors. Each end has a 4-pin, 3-wire plug, one male and one female, and strips can be joined end to end in series. Cut sections are no longer waterproof unless properly sealed. The strip is rated for more than 65,000 hours of use.



