Prices are checked against each store and labelled with when.
This is a closed-loop stepper kit built around a Nema34 86mm frame motor, an HBS86H hybrid servo driver, a 400W 60V power supply and a 3-meter extended encoder cable. The encoder lets the driver compare commanded and actual shaft position and correct for lost steps, which is the main advantage over open-loop steppers under heavy loads or fast acceleration. It suits CNC builders, router and mill retrofits, and automation projects that need reliable positioning at Nema34 torque levels. Against open-loop Nema34 setups it adds precision and fault tolerance; against full AC servo systems it is simpler to wire and tune, but it is still a stepper at heart, with torque falling off at higher speeds.
In stockSold by Muzi Trading CompanyReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a closed-loop stepper motor kit built around a Nema34 motor, an HBS86H hybrid servo driver, a 400 W 60 V DC power supply and a 3 m encoder cable. The motor has a built-in encoder that reports the shaft position to the driver. The motor is offered in three torque ratings: 4.5 N·m, 8.5 N·m and 12 N·m.
The driver compares the position it is commanded to reach with the actual position from the encoder and corrects the motor when a step is lost, so errors do not build up over a run. The HBS86H uses a vector-based closed-loop control algorithm and has cooling fans to draw heat away. It adjusts current output as the load changes, which reduces heat and keeps motion smoother and quieter at medium and low speeds.
Nema34 is a standard flange and shaft size for industrial automation, and the motor body is 86 mm long. The 400 W, 60 V DC supply feeds the motor and driver, and the encoder cable links the motor's encoder port to the driver's feedback port.
It checks today's price at every store, compares the alternatives and answers in about a minute.












