
LDO Stepper Motors (NEMA 8/14)
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $27.99 at Filastruder (checked Nov 17, 2026).

Prices are checked against each store and labelled with when.
LDO's NEMA 8 and NEMA 14 stepper motors are compact motors for small 3D printers, extruders and lightweight motion projects where a full-size NEMA 17 is too big or too heavy. They ship with cables, and LDO publishes a data sheet per model covering wiring and winding temperature. The range covers several body lengths and current ratings rather than one motor, so the right pick depends on the torque and driver current your build needs. Compared with generic no-name steppers, LDO is known in the 3D printing community for consistent winding and quiet running, though the small frames trade torque for size.
In stockReturn policy
Owners in the 3D printing community rate LDO steppers for consistent quality and quiet operation. The small NEMA 8 and 14 sizes are picked mainly for compact extruders and lightweight axes, where users accept lower torque.
These are LDO stepper motors in NEMA 8 and NEMA 14 frames. Each motor includes a cable.
Step angle is the amount of a 360° circle each full step completes. A 1.8°/step motor takes 200 full steps per revolution, and a 0.9°/step motor takes 400; smaller step angles allow more precise motion.
Winding temperature is generally about 50 °C above ambient, so a 130 °C winding temperature means a maximum chamber temperature of 80 °C. Holding torque is the maximum torque a motor can exert while powered, and detent torque is the torque when the motor is not energized.
It checks today's price at every store, compares the alternatives and answers in about a minute.
