What is PETG good for compared with PLA?

PETG is tougher and holds up better to heat and outdoor use than PLA. PLA is stiffer and easier to print, so use PETG for functional parts and PLA for display pieces.

Does it need a heated bed?

Yes. PETG prints best on a heated bed, typically around 70–80°C, with a nozzle around 230–250°C. A bare glass bed can grip too hard, so a release agent or textured sheet helps.

Will it fit my printer?

It is 1.75mm filament on a 1kg spool, which fits most common FDM printers that take 1.75mm material. Check your spool holder handles a full 1kg roll.

How should I store it?

PETG absorbs moisture, which causes popping and poor layers. Keep the spool sealed with desiccant and dry it before long prints if it has been out in humid air.

Is it food safe or weatherproof?

PETG handles outdoor conditions better than PLA, but printed parts are not reliably food safe because of layer gaps. Treat it as a durable functional material, not a food-contact one.

Creality

Soleyin Basic PETG 3D Printer Filament Lavender 1.75mm 1kg Spool

Best price now

$19.79at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Creality

Soleyin Basic PETG 3D Printer Filament Lavender 1.75mm 1kg Spool

Best price now

$19.79at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $19.79 at Walmart on Nov 11.

Our take on the Soleyin Basic PETG 3D Printer Filament Lavender 1.75mm 1kg Spool

Soleyin Basic PETG is a 1.75mm filament on a 1kg spool, sold under the Creality brand. PETG sits between PLA and ABS: tougher and more heat-resistant than PLA, easier to print than ABS, with good layer adhesion. It suits hobbyists and makers printing brackets, enclosures, jigs and outdoor parts that need some flex and weather resistance. Against PLA it trades easy printing for strength; against ABS it trades heat resistance for far less warping and no fumes.

Best forMakers printing functional parts and bracketsHobbyists moving up from PLAParts that need toughness and some heat resistancePrototypes and custom fixtures

Pros

Tough and impact-resistant compared with PLA
Better heat resistance than PLA
Low warping and odor compared with ABS
Good layer adhesion
Prints on most FDM printers with a heated bed

Cons

Stringier than PLA and needs tuning
Can stick too well to bare glass beds
Absorbs moisture, so drying before use helps
Slower print speeds than PLA for clean results

Soleyin Basic PETG 3D Printer Filament Lavender 1.75mm 1kg Spool prices at every store

WalmartNew
In stockSold by Acmer storeReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$19.79Free shippingChecked Nov 11
Visit Walmart

About the Soleyin Basic PETG 3D Printer Filament Lavender 1.75mm 1kg Spool

Soleyin Basic PETG is a 3D printer filament in lavender. It is a PETG filament with a 1.75mm diameter, supplied on a 1kg spool.

The filament is made for both hobbyists and professionals. It is used for prototyping designs and for making custom parts.

Material: PETG
Diameter: 1.75mm
Weight: 1kg spool
Color: Lavender (purple)
Brand: Creality

Specifications

color: PurpleSource
actual_color: LavenderSource

Questions and answers

What is PETG good for compared with PLA?: PETG is tougher and holds up better to heat and outdoor use than PLA. PLA is stiffer and easier to print, so use PETG for functional parts and PLA for display pieces.
Does it need a heated bed?: Yes. PETG prints best on a heated bed, typically around 70–80°C, with a nozzle around 230–250°C. A bare glass bed can grip too hard, so a release agent or textured sheet helps.
Will it fit my printer?: It is 1.75mm filament on a 1kg spool, which fits most common FDM printers that take 1.75mm material. Check your spool holder handles a full 1kg roll.
How should I store it?: PETG absorbs moisture, which causes popping and poor layers. Keep the spool sealed with desiccant and dry it before long prints if it has been out in humid air.
Is it food safe or weatherproof?: PETG handles outdoor conditions better than PLA, but printed parts are not reliably food safe because of layer gaps. Treat it as a durable functional material, not a food-contact one.
Where is the Soleyin Basic PETG 3D Printer Filament Lavender 1.75mm 1kg Spool cheapest?: At Walmart, for $19.79, as of our latest check.