This is a 1/16 scale 4x4 electric RC truggy with a brushless motor. It runs on two 3S LiPo batteries and has a top speed above 56 mph. The truck has splash-proof electronics and a sealed metal drivetrain, and it is built for sand, mud, gravel and grass.
A 5480KV 2847 brushless motor and a 50A electronic speed controller power it. An Electronic Stability Program (ESP) helps the truck run straight at high speed and reduces rollover risk. The chassis has 1.8mm CNC-machined aluminum blocks, a hardened steel pinion, a 0.8M/37T spur gear, sealed 0.9M bevel and differential gears, and a central differential. Four adjustable oil-filled shocks and 85mm sponge-inserted tires handle impacts and keep grip on loose ground.
It has two speed modes. Low-speed mode reaches up to 31 mph. To unlock high-speed mode, power on and pair the remote. Hold the steering wheel forward for 5 to 10 seconds until the headlights flash, then hold it backward for 5 to 10 seconds until the lights flash again. The 2.4GHz transmitter has adjustable throttle control from 30% to 100%. Use the car in open areas and read the manual before the first run.
- Scale
- 1/16
- Drive
- 4WD
- Top speed
- Over 56 mph (GPS-tested); up to 31 mph in low-speed mode
- Motor
- 5480KV 2847 brushless
- ESC
- 50A, with cooling fan
- Batteries
- 2 x 3S LiPo (45C)
- Run time
- Up to 40 minutes with the two batteries
- Chassis
- 1.8mm CNC-machined aluminum blocks
- Gears
- Hardened steel pinion, 0.8M/37T spur gear, sealed 0.9M bevel and differential gears, central differential