The DeWALT DCN920P1 is a cordless, battery-powered framing nailer for wall framing, subfloor installation, sheathing and toe-nailing. It drives 21-degree plastic collated framing nails up to 3-1/2" long, with no compressor or hose.
The Active Flywheel Technology keeps the flywheel spinning for 6 seconds after the trigger is released, which removes ramp-up time in rapid sequential mode. The nailer drives up to 72% more sub-flush than the previous generation. The nose is redesigned for toe-nailing, so it aligns, grips and drives at steep angles. The magazine is high-strength magnesium, and the springs and driver blade are field-serviceable.
The kit includes the nailer, a 20V MAX XR 5.0Ah battery, a charger and a soft bag. The battery is rated for up to 530 sq ft of subflooring per charge (based on 32 nails per 3/4" OSB 4x8 panel) or up to 100 ft of wall framing per charge. It also works with other tools on the DeWALT 20V MAX platform. The nailer accepts the optional DZN920 extended magazine, which holds two strips of nails, and is Chip-Ready for DeWALT TOOL CONNECT.
- Model
- DCN920P1
- Power
- 20V MAX XR battery, cordless, brushless motor
- Nail angle
- 21 degree, plastic collated
- Nail length
- Up to 3-1/2"
- Weight
- 8.65 lbs, tool only (without battery)
- Magazine
- High-strength magnesium
- Flywheel
- Stays active for 6 seconds after trigger release
- Runtime
- Up to 530 sq ft of subfloor or 100 ft of wall framing per charge (5.0Ah battery)
- In the box
- Framing nailer, 20V MAX XR 5.0Ah battery, charger, soft bag
- Optional accessories