This is an 18V MultiVolt cordless framing nailer that drives 30° paper tape collated nails. It needs no hoses, compressors or gas cartridges. It is part of the Metabo HPT MultiVolt system of 18-volt and 36-volt power tools.
It uses an Air Spring Drive System, which drives each nail with sealed, compressed air. There is no ramp-up time, and it drives up to 2 nails per second. It can flush drive nails up to 3-1/2 in x 0.131 in into tough materials, with a feel similar to a pneumatic nailer. A brushless motor powers it.
It accepts clipped head and offset round head nails from 2 in to 3-1/2 in long. It can be fired in sequential mode or bump fire mode.
- Nailer type
- Cordless framing nailer
- Power
- 18V, battery powered, brushless motor
- Nails per charge
- Up to 400
- Drive rate
- Up to 2 nails per second
- Fastener type
- 30° clipped and offset round head, paper collated nails
- Nail length
- 2 in to 3-1/2 in
- Nail diameter
- .113 in to .131 in (0.131 in maximum)
- Magazine capacity
- 47 nails, strip loading
- Nail angle
- 30°
- Firing modes
- Sequential and bump fire (selective actuation)
- Auto shut-off
- After 30 minutes of inactivity
- Uses
- Framing and punch-out work on a jobsite
- Housing