The DEWALT DCN930B is a 20V MAX* brushless cordless framing nailer for 30° paper tape collated nails. It runs on a battery, so it needs no hoses or compressor. It is sold as a bare tool, and the battery and charger are sold separately.
An active flywheel stays active for 6 seconds after the trigger is released. In rapid sequential mode this removes ramp-up time between shots. The redesigned nose is built to align, grip and drive nails at aggressive angles for toe-nailing. The magazine is made of high-strength magnesium. The springs and driver blade can be serviced in the field.
DEWALT states it can install up to 530 sq. ft. of subflooring or complete up to 100 ft. of wall framing per charge. It drives nails up to 72% more sub-flush than the previous generation. The tool is Chip-Ready™ for tracking in the TOOL CONNECT™ system, and the chip is sold separately.
- Type
- Cordless brushless framing nailer, 30° paper tape
- Power source
- 20V MAX* battery (sold separately)
- Magazine angle
- 30° paper tape
- Nail diameter
- 0.113 to 0.131 in.
- Nail length
- 2 to 3-1/2 in.
- Applications
- Residential framing, sheathing, subflooring, setting trusses, punchout, deck building
- Dimensions
- 13.9 in. L x 5.6 in. W x 13.2 in. H (353 x 142 x 335 mm)
- Weight
- 8.65 lbs. (138.4 oz, 3.92 kg), tool only
- Magazine
- High-strength magnesium
- Optional magazine
- Extended magazine DZN920 holds 2 strips of nails (sold separately)
- Tool tracking