The DeWalt D24000 is a 24-inch wet tile saw built around a cantilevering rail and cart system, so one person can move and set up the 69 lb saw and stand. A 1-1/2 HP, 15A motor handles porcelain, marble and granite, and the saw makes 24-inch rip cuts, cuts 18-inch tile on the diagonal, and offers 45° and 22.5° miter settings plus a plunge cut for outlets and registers. Dual adjustable water nozzles and rear and side water attachments keep spray down. It suits tile setters and serious remodelers cutting large-format and hard tile; against lighter bench saws it trades portability for capacity and power, and owners rate it highly for accuracy and clean cuts.
In stockReturn policy
Owners rate the D24000 highly, praising its accuracy on large porcelain and its ability to cut hard tile without bogging down. Many like that one person can set it up and that the water system keeps spray contained.
The DeWalt D24000 is a wet tile saw with a cantilevering rail and cart system. It makes 24" rip cuts and cuts 18" tiles diagonally. A 1-1/2 HP, 15A motor cuts hard materials such as tile, porcelain, marble and granite.
The stainless steel rail system is integrated into the saw frame for accurate cuts. The saw has a 45°/22.5° miter feature for angled cuts. A plunge feature makes cuts for electrical outlets and A/C registers. The edge guide has a 2-position 45-degree setting for corner cuts.
Dual water nozzles adjust to place water on the blade and limit over-spray and mist. Rear and side water attachments catch over-spray from large tile and keep the water in the pan. The 5-gallon water pan has a compartment for diamond blades and accessories. At 69 lbs, one person can transport and set up the saw.
