This is a 1500W, 48V front hub motor conversion kit that turns a conventional bicycle into an electric bike. It is built for a 26 inch x 4 inch fat tire, which is not included. The brushless, gearless hub motor can reach speeds up to 34 mph. It suits mountain bikes, road bikes and cruiser bikes.
The dual mode controller works with Hall effect and non-Hall effect modes. A pedal assist sensor reads your pedal cadence so the motor can help as you ride, and a twist throttle is included. The LCD panel shows battery level, speed, mileage and more. The included brake levers cut power to the motor when you brake. The kit is CE certified.
The kit is for conventional bicycles only, not for tricycles or tractors. Installation at a licensed repair shop is advised. Riding in the rain is not recommended, and a helmet should be worn.
- Motor power
- 1500W brushless, gearless hub motor
- Controller power
- 1500W dual mode controller
- Voltage
- 48V
- Top speed
- Up to 34 mph
- Motor speed
- 510 RPM
- Motor torque
- 58.5 Nm
- Climbing angle
- 20 degrees
- Weight capacity
- 330 lbs (150 kg)
- Tire size
- 26" x 4" (65 x 10.2 cm), tire not included
- Overall size
- 22 7/16" x 3 1/4" (57 x 8.3 cm), diameter x width
- Rim diameter
- 22 7/16" (57 cm)
- Motor diameter
- 9 1/2" (24.2 cm)
- Axle length
- 7 7/8" (20 cm)
- Axial length
- 9 7/16" (24 cm)
- Dropout spacing
- Front 5 1/8" (13 cm); rear 6 11/16" (17 cm)
- Spokes
- 36 spokes, 12G, 6 5/16" (16.2 cm) long
- Brake type
- Disc brake or V-brake
- Recommended battery
- 48V/35A, 20Ah (battery and charger not included)
- Display
- LCD panel showing battery level, speed, mileage and more
- Certification
- CE
- In the box
- 1 front hub motor (26"), 1 dual mode motor controller, 1 PAS sensor, 1 LCD meter, 2 brake levers, 1 handle grip, 1 twist throttle, 1 controller bag, 2 winding pipes, 10 cable ties, 2 wire connectors,