What is the difference between the vertical and horizontal bases?

The vertical base works like a conventional trim router with a threaded template guide. The horizontal base sits at a 1.5-degree pitch with a V-cutout and sensor bearing for flush trimming edge banding, including around corners.

Can it use ordinary bearing-less router bits?

Yes. The guide bearing mounts on the attachable base feeler rather than on the bit, so bearing-less bits work and the bearing cannot slip against the work.

How fine is the depth adjustment?

The micro-adjustment is accurate to about 1/256 inch, or 1/10 mm.

What speeds does it run at?

The 6 A motor runs from 10,000 to 26,000 RPM with variable speed and constant-speed electronics that hold RPM under load.

Is it powerful enough for groove cutting?

It handles light grooves and trim work well. For deep mortises or heavy panel routing, a larger router is the better choice.

What comes in the set?

The set includes the router with its bases, the dust extraction shroud and the hand-grip; check the box contents for the specific base and accessory configuration.

Where is the Festool 576239 MFK 700 EQ Trim Router Set cheapest?

At Amazon, for $699.00, as of our latest check.

Where can I buy the Festool 576239 MFK 700 EQ Trim Router Set?

15 stores we checked sell it, including Amazon, Woodcraft Supply, Rockler Woodworking and Hardware, Floor Mechanics, Tool Nut.

Festool 576239 MFK 700 EQ Trim Router Set

Best price now

$699.00at AmazonChecked 59 min ago

Compared across 14 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.

Visit Amazon

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

What reviewers say

Owners of the MFK 700 tend to be trade users who value the horizontal base for edge banding and the dust collection on site. The common complaints are the modest power for the size and the cost of the system.

What people mention

Edge bandingPraisedOwners say the pitched horizontal base trims banding flush and handles corners well.
Dust extractionPraisedThe built-in shroud is reported to capture most chips, which matters on site.
Base changesPraisedThe tool-less modular design is described as fast to switch between vertical and horizontal.
PowerCriticisedSome owners find 1 HP limiting for anything beyond trimming and light grooving.
ValueCriticisedBuyers note the tool and its bases cost far more than a basic trim router.

About the Festool 576239 MFK 700 EQ Trim Router Set

The Festool MFK 700 EQ is a compact, lightweight trim router for trimming laminate and edge banding and for routing grooves. It has a 1 HP variable speed motor and a modular base that changes without tools. The router converts from a vertical to a horizontal position.

The guide bearing mounts on the router instead of on the bit. This removes the risk of burning the material if a bearing slips, and it lets you use bearing-less router bits when the base feeler bearing is attached. MMC (Multi-Material Speed Control) electronics hold speed constant under load and protect the motor from overload.

The vertical base has a built-in threaded template guide and a built-in dust extraction shroud. The horizontal base is pitched at 1.5 degrees to protect surfaces when edge banding. It has a V-shaped cutout and a sensor bearing guide for flush trimming, even around corners. Large support bases, an additional hand-grip and micro adjustment accurate to 1/256" (1/10 mm) provide control.

Power

1 HP, 6 Amp, 120V AC

Speed

10,000-26,000 RPM drive shaft speed, variable

Speed control

MMC (Multi-Material Speed Control) electronics with constant speed under load and overload protection

Adjustment

Micro adjustment accurate to 1/256" (1/10 mm)

Weight

4.2 lb

Base design

Modular, tool-less base changes; vertical and horizontal bases