
Firestik "Original" CB Antenna (KW2-B)
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Firestik Original KW2-B is a wire-wound CB antenna built on a solid fiberglass core with a glass fiber reinforced shaft. It works as a single or co-phased antenna for 27 MHz CB traffic and also pulls in NOAA weather channels. The 3/8x24 threaded ferrule fits a wide range of mounts, and the tapered lug nut ferrule and water-tight casing are made to resist vibration and static. It is a top choice for truckers, off-roaders and RV owners who want long range from a tall 5/8-wave whip, though it needs an adequate ground plane and must be tuned by trimming the loading coil.
In stockReturn policy
Buyers describe the antenna as working exactly as described and performing well.
| Whip length | Power rating |
|---|---|
| KW2 | 100W |
| KW3 | 300W |
| KW4 | 400W |
| KW5 | 500W |
| KW6 | 600W |
| KW7 | 700W |
The Firestik KW2-B is a wire-wound CB antenna with a 2-foot whip. It receives 27 MHz CB radio traffic as well as NOAA Weather channel alerts. It can be installed as a single antenna or in a co-phased setup.
The antenna is built on a solid fiberglass core, with a wire winding blended into a glass fiber reinforced shaft. The base is a standard 3/8x24 threaded ferrule in a vibration-resistant, tapered lug nut style. The casing is water-tight and static-reducing, and the loading coil is a hi-performance design.
It fits any mount with a 3/8x24 threaded ferrule and needs an adequate ground plane for installation. Tuning is required to set the SWR: remove the antenna cap and cut back the plastic coating at the tip to expose the copper wire, trimming about 1/8 in at a time and rechecking the readings. The 2-foot whip is rated at 100 W.
It checks today's price at every store, compares the alternatives and answers in about a minute.













