Flipsky 75100 V2.0
Best price now
46% under what the other stores charge
Compared across 5 stores. Prices are checked against each store and labelled with when.
46% under what the other stores charge
Compared across 5 stores. Prices are checked against each store and labelled with when.
The Flipsky 75100 V2.0 is a single-motor VESC-based speed controller for e-skates, e-bikes, scooters and light EVs. It runs 14-84V (4-20S) and handles 100A continuous with 250A peaks, with DC, BLDC and FOC modes plus USB, CAN and UART ports. It suits builders who want a high-voltage VESC-compatible controller with regenerative braking and a built-in power switch. It is a bare board rather than a sealed enclosure, so it needs mounting and cooling, and it sits below Flipsky's dual 75100 units for two-motor builds.
In stockReturn policy
In stockShips from abroad · duties may apply
In stockSold by sama-707726
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Out of stockShips from abroad · duties may apply
Also available at
Store links may earn us a commission.
Lowest price we've seen: $98.00 on Nov 20 at Alibaba.com. Tracked across 5 stores since Nov 20.
Owners of Flipsky 75100 boards generally rate the power and VESC compatibility for the money, while noting heat and the need for careful setup.
The Flipsky 75100 V2.0 is a programmable motor controller rated at 14-84V (4-20S), with 100A continuous current and 250A peak current. It runs in DC, BLDC and FOC (sinusoidal) modes and is wired with 12AWG cable. A 5V @ 1A BEC supplies power to connected devices.
It comes with firmware 5.02 and can be upgraded; for firmware 5.03 or newer, the phase filter must be turned off. Control and programming go through USB, CAN and UART ports, and it accepts PPM, ADC, NRF and UART input. It works with ABI, HALL, AS5047 and AS5048A sensors and supports regenerative braking.
The unit measures 103 x 58 x 24 mm and has a red power switch button.
It checks today's price at every store, compares the alternatives and answers in about a minute.




