The Flipsky FT85BD100A is a dual-motor electronic speed controller for electric skateboards, e-bikes and scooters, built around an ARM Cortex-M4 CPU and housed in an aluminum case. It runs 14-85V (4S-20S), delivers 100A continuous per side and 250A peak, and supports sensored, sensorless and encoder motor setups. It is not a VESC: it is programmed through Flipsky's own ESC Tool or the VX4 remote, and it supports FOC for quiet, smooth starts plus lights, a horn and regenerative braking. It suits builders running high-voltage dual-motor drivetrains who want Flipsky's ecosystem; riders who want a standard VESC-compatible platform should look elsewhere.
In stock
Lowest price we've seen: $95.00 on Nov 20 at flipsky.net. Tracked across 1 store since Nov 20.
Ratings are middling at 3.7 out of 5. Owners who get it configured praise the power and smooth FOC operation; others report a steep setup curve and dependence on Flipsky's own tooling.
The Flipsky FT85BD100A is a dual electronic speed controller in an aluminum case. It works with 14-85 V batteries, safe for 4S-20S packs. Continuous current is 100 A per side (200 A dual), with peak current of 250 A single and 500 A dual. The design is non-VESC.
The controller uses an AT32F403ARCT7 CPU (ARM Cortex-M4) running at 240 MHz, and its maximum PWM switching frequency is 45 kHz. Power wiring is 10 AWG and motor wiring is 12 AWG. The unit measures L132 x W81 x H26.5 mm including its aluminum case.
It is programmable through the Flipsky ESC Tool or a VX4 remote with firmware VX4_V1.2.1 or above. It supports FOC motor control for low working noise and smooth starting, along with sensored HALL and sensorless IPDS and HFPI modes. A self-resetting switch with a green LED button handles sliding power-on and adjustable automatic shutdown. Front lights, rear brake lights and a horn can be connected through extra interfaces.
It checks today's price at every store, compares the alternatives and answers in about a minute.
