This is a front hub motor conversion kit with a 500W geared hub motor, a battery and a built-in controller. The motor is made by MXUS. It is laced into the wheel of your choice and converts a bike to electric.
The motor runs on 36V or 48V, and 48V lets it reach its full potential. Top speed can be as high as 50 km/h. The top speed can be set in the display to 32 km/h or 40 km/h. Front motors are easy to install.
If your bike has an aluminum fork, use a torque arm, because aluminum dropouts may snap under heavy load. To check, hold a magnet to the fork: if it sticks, the fork is steel and no torque arm is needed. The motor axle is 10mm wide and some dropouts are around 9.5mm, so you may need to lightly file the dropouts until the axle slides in.
- Motor
- 500W geared front hub motor by MXUS
- Voltage
- 36V or 48V (48V recommended for full performance)
- Top speed
- Up to 50 km/h; can be limited to 32 km/h or 40 km/h in the display
- Battery options
- 48V 12AH (Sanyo 18650 Li-Ion); 48V 15AH (Samsung 50E 21700 Li-Ion); 48V 20AH (Samsung 50E 21700 Li-Ion)
- Range
- 12AH: 30-60 km; 15AH: 50-80 km; 20AH: 80-120 km
- Capacity
- 48V 15AH battery = 720WH
- Axle width
- 10mm
- Display
- LCD5
- In the box
- Geared hub motor laced into your choice of wheel, battery, pedal assist sensor, throttle, brake sensors, LCD5 display, all necessary cables, battery charger