The Goodman GRVT800803BN is an 80,000 BTU two-stage gas furnace with a variable-speed ECM blower and an 80% AFUE rating. It runs at a lower heating stage in mild weather and ramps up when demand rises, and the variable-speed blower moves air gradually for steadier temperatures and quieter, more continuous fan operation. It is a non-condensing design that vents through a metal flue, so it suits replacements where a chimney or metal flue already exists rather than homes set up for high-efficiency PVC venting. Against 96%+ condensing rivals it uses more fuel per unit of heat, but it costs less to install and its two-stage, variable-speed setup is a step above single-stage builder-grade furnaces.
In stockReturn policy
Owners and installers rate the furnace well overall, with most praise going to the steadier, quieter heat from the two-stage valve and variable-speed blower. Complaints center on the 80% efficiency limit and on repair costs when blower or control parts fail.
The Goodman GRVT800803BN is a residential gas furnace with two-stage heating and a variable-speed ECM blower. It has 80,000 BTU of heating input and about 64,000 BTU of heating output at its rated 80% AFUE. It uses a non-condensing design, so it requires metal flue venting.
The two-stage gas valve runs the furnace at a low stage of about 56,000 BTU input during moderate demand. It switches to the high stage of 80,000 BTU input when more heat is needed. The variable-speed blower ramps airflow up or down gradually instead of running at one fixed speed. Multiple continuous-fan speed options are available.
The furnace has a compact cabinet and can be installed in upflow or horizontal positions. It includes ComfortBridge technology, an integrated control system for system communication and airflow management. The heat exchanger is aluminized-steel and tubular. Ignition is by silicon nitride hot surface igniter, and the control board has self-diagnostics.







