StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai
G
Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg

Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg

4.3(3 ratings)

Best price now

$9.24at 3D Printing CanadaChecked 1 h ago

Prices are checked against each store and labelled with when.

Finding cheaper alternatives

Checking the Deal.ai store…

Price facts

  • Lowest price today: $9.24 at 3D Printing Canada (checked Nov 18, 2026).
  • $9.24at 3D Printing CanadaChecked 1 h ago
    Visit 3D Printing Canada

    Our take on the Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg

    This is a 1 kg spool of 1.75 mm PETG filament in grey, aimed at makers printing functional parts on a budget. PETG sits between PLA and ABS: tougher and less brittle than PLA, easier to print than ABS, with good layer adhesion. The trade-offs are typical of PETG: it strings, needs slower speeds and higher nozzle temperatures, and sticks aggressively to smooth beds. It suits utility prints, brackets, prototypes and jigs where strength matters more than fine detail.

    Best forFunctional and load-bearing partsHigh-volume everyday printingMakers moving up from PLAPrototypes and engineering parts
    Pros
    • Tougher and more impact resistant than PLA
    • Less brittle than standard PLA blends
    • Good interlayer bonding for strong parts
    • Neutral grey hides layer lines and scuffs
    • Works for functional prints, not just display models
    Cons
    • Strings and oozes more than PLA
    • Needs higher nozzle temperatures and slower speeds
    • Can bond too hard to smooth PEI or glass beds
    • Grey is a plain finish with no special effect

    Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg prices at every store

    • 3D Printing CanadaNew

      In stockShips from Canada · duties may applyReturn policy

      $9.24Checked 1 h ago
      Visit 3D Printing Canada

    About the Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg

    This is a 1 kg spool of grey PETG filament with a 1.75 mm diameter, wound on a spool that fits most standard spool holders. It is made for FDM/FFF 3D printers and works with both direct drive and Bowden extruders.

    PETG is stronger and more impact resistant than PLA, and it is more flexible and less brittle, so printed parts resist cracking. It bonds well between layers and holds up to humidity and light chemical exposure. Prints come out with a slightly glossy surface, and the material warps less than ABS.

    The filament needs higher extrusion temperatures than PLA. A heated bed is recommended, along with a PEI sheet, glue stick or textured surface, and surface preparation should be adjusted so the part does not stick too strongly.

    Material
    PETG
    Color
    Grey
    Diameter
    1.75 mm
    Weight
    1 kg
    Spool
    Included
    Finish
    Slightly glossy
    Printer compatibility
    Most 1.75 mm FDM/FFF printers
    Extruder compatibility
    Direct drive and Bowden
    Print temperature
    Higher than PLA
    Bed adhesion
    Heated bed recommended; PEI sheet, glue stick or textured surface
    Warping
    Less than ABS
    Layer adhesion
    Strong interlayer bonding
    Moisture and chemical resistance
    Resists humidity and light environmental stress

    Ask our agent about this product

    It checks today's price at every store, compares the alternatives and answers in about a minute.

    Enter to send, Shift+Enter for a new line

    Questions and answers

    Is PETG harder to print than PLA?
    Yes. PETG needs a hotter nozzle, slower speeds and tuned retraction to control stringing. Once dialed in it prints reliably and gives stronger parts than PLA.
    What nozzle temperature does PETG need?
    Most PETG prints around 230–250°C with a bed near 70–80°C. Start in the middle of that range and adjust for your printer and spool.
    Will it stick too well to my build plate?
    PETG can bond very strongly to smooth PEI and glass. Use a release agent or a textured sheet, and let the plate cool before removing parts.
    Is 1.75 mm the right size for my printer?
    1.75 mm is the common standard for most modern desktop printers. Check your printer's spec if you own an older or specialty machine.
    What is PETG good for compared with PLA?
    PETG is better for brackets, clips, jigs and parts that take load or knocks. PLA is easier to print and better for fine detail and display pieces.
    Where is the Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg cheapest?
    At 3D Printing Canada, for $9.24, as of our latest check.
    What do buyers say about the Grey - Budget PETG Filament (With Spool) - 1.75mm, 1kg?
    Rated 4.3 out of 5 from 3 ratings.

    More 3d printer filament

    • L
      Linder Carbon Fiber PETG Filament 175mm 1kg Spool
      Linder Carbon Fiber PETG Filament 175mm 1kg Spool
    • K
      Kingroon PETG 3D Printer Filament 1.75mm 10kg
      Kingroon PETG 3D Printer Filament 1.75mm 10kg
    • P
      PETG Printer Filament 1.75mm, 2 Pack (2x1kg Black)
      PETG Printer Filament 1.75mm, 2 Pack (2x1kg Black)
    • K
      Kingroon PETG 3D Printer Filament 10kg 1.75mm
      Kingroon PETG 3D Printer Filament 10kg 1.75mm
    • U
      Unveil Form Matte PETG Filament 8-Pack (8 × 1kg), Refill - 1.75mm
      Unveil Form Matte PETG Filament 8-Pack (8 × 1kg), Refill - 1.75mm
    3
    3D Printer PETG Filament 1.75mm 1KG (2.2lbs), Brown
    3D Printer PETG Filament 1.75mm 1KG (2.2lbs), Brown
  • G
    Gizmo Dorks PETG Filament 1.75 mm 1 kg - White
    Gizmo Dorks PETG Filament 1.75 mm 1 kg - White
  • M
    Mystery Spool - PETG 1.75mm
    Mystery Spool - PETG 1.75mm