- Does it need a hardened nozzle?
- Yes. The carbon fibers wear brass quickly, so use a hardened steel or ruby nozzle. A 0.4 mm tip can clog; many users go to 0.5 or 0.6 mm.
- How does it compare with plain PETG?
- It is stiffer and more dimensionally stable, with a matte finish. Plain PETG is tougher and less brittle, and it does not wear your nozzle.
- What temperatures should I print it at?
- Treat it like PETG: roughly 230 to 250 C on the hotend and 70 to 80 C on the bed. Run a temperature tower, since carbon-filled blends vary.
- Is it food safe or safe for indoor use?
- No. Carbon fiber additives and the printing process make it unsuitable for food contact, and sanding or cutting parts releases fine dust, so wear a mask.
- Does it absorb moisture?
- PETG absorbs some moisture. Dry the spool before use and store it sealed; wet filament prints foamy and stringy.
- What can I print with it?
- Brackets, jigs, fixtures, drone frames and car interior parts. Avoid parts that flex a lot, since it is more brittle than unfilled PETG.
- Where is the Linder Carbon Fiber PETG Filament 175mm 1kg Spool cheapest?
- At Lowe's, for $95.72, as of our latest check.