GZ GUOZHI 55A LED Plasma Cutter, Non-Touch Pilot Arc, 1/2"Clean Cut,w/IGBT Inverter,Front Pressure Gauge,Pre/Post Flow,2T/4T Mode
Where to buy
No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.
Prices are checked against each store and labelled with when.
Check today's price at WalmartAsk our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Our take on the GZ GUOZHI 55A LED Plasma Cutter, Non-Touch Pilot Arc, 1/2"Clean Cut,w/IGBT Inverter,Front Pressure Gauge,Pre/Post Flow,2T/4T Mode
The GZ GUOZHI 55A LED Plasma Cutter is a dual-voltage (110V/220V) inverter plasma cutter with a non-touch pilot arc and high-frequency start. It cuts up to 1/2 inch cleanly and has an LED display showing current and air pressure, plus a front pressure gauge, pre/post flow and 2T/4T modes. It suits fabricators and serious hobbyists who want pilot-arc cutting without dragging the torch on the work. Against budget 50A cutters it adds the display, gauge and dual voltage; against premium brands it is cheaper but has a smaller support and parts network.
- Non-touch pilot arc starts cuts without contacting the metal
- Cuts cleanly up to 1/2 inch
- Dual voltage works on 110V and 220V outlets
- LED display shows current and air pressure in real time
- Front pressure gauge and pre/post flow help set clean cuts
- 2T/4T and test modes add control
GZ GUOZHI 55A LED Plasma Cutter, Non-Touch Pilot Arc, 1/2"Clean Cut,w/IGBT Inverter,Front Pressure Gauge,Pre/Post Flow,2T/4T Mode prices at every store
- WalmartNew
Out of stockSold by GZ GUOZHI WelderReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$59.99Checked 15 min ago
What reviewers say
- 4.2 / 524 ratings
Rated 4.2 out of 5 from 24 ratings, buyers generally report it cuts well for the money and the pilot arc makes starting easy. Some note setup and air supply matter a lot to cut quality.
- Pilot arcPraisedBuyers like that the torch starts the arc without touching the metal.
- Cut qualityMixedOwners report clean cuts on thicker steel but say results depend on air pressure and technique.
Questions and answers
- Can it run on a standard 110V outlet?
- It supports 110V and 220V. On 110V the output is limited by the circuit, so check your breaker and outlet rating before cutting at full power.
- How thick can it cut?
- It is rated for a clean cut up to 1/2 inch. Severance cuts on thinner material are easier; thicker steel needs slower travel and good air pressure.
- Does it need compressed air?
- Yes. It needs a clean, dry air supply at the pressure shown on the front gauge. Moisture or oil in the air hurts cut quality and consumable life.
- What is the difference between 2T and 4T mode?
- 2T means the arc stays on while you hold the trigger. 4T lets you press and release to start and stop, which is easier on long cuts.
- What is a non-touch pilot arc?
- The arc starts through high frequency without touching the tip to the work, so you can start on painted, rusty or expanded metal more easily.
- What comes in the box?
- The cutter, plasma torch, ground clamp with cable, air regulator and hose are the usual contents. Confirm the exact list with the seller before ordering.
- What do buyers say about the GZ GUOZHI 55A LED Plasma Cutter, Non-Touch Pilot Arc, 1/2"Clean Cut,w/IGBT Inverter,Front Pressure Gauge,Pre/Post Flow,2T/4T Mode?
