The AIME CUT-50 is a plasma cutting machine for carbon steel, stainless steel, aluminum, copper and iron. It runs on 220/240V or 110/120V. The arc starts without touching the metal, so painted, rusty and uneven surfaces cut with less dross and the nozzle wears less, for a cleaner, more consistent cut.
Cut capacity depends on the power supply: at 220/240V the machine makes a 1/2" clean cut and a 1/16" break cut, and at 110/120V a 3/10" clean cut and a 3/5" break cut. An NPT 1/4" plug and an air filter regulator come pre-installed, with the regulator at the front for setting pressure and checking for leaks. Setup takes about 1 minute, and a 6-50 plug is included.
The LED control panel carries an air pressure range reminder, alongside 6–15 seconds of arc starting time and 2–10 seconds of afterflow. The machine runs on compressed air. It is used for home work, auto paint, manufacturing, farm, HVAC and metal art.
- Power
- 43A
- Input voltage
- 220/240V or 110/120V
- Cut capacity (220/240V)
- 1/2" clean, 1/16" break
- Cut capacity (110/120V)
- 3/10" clean, 3/5" break
- Materials
- Carbon steel, stainless steel, aluminum, copper, iron
- Arc starting
- Non-touch
- Arc starting time
- 6–15 seconds
- Afterflow time
- 2–10 seconds
- Display
- LED panel with air pressure range reminder
- Air supply
- Compressed air
- Regulator
- Front-mounted air filter regulator
- Air inlet
- Pre-installed NPT 1/4" plug
- Setup time
- About 1 minute
- In the box
- 6-50 plug
- Uses
- Home, auto paint, manufacturing, farm, HVAC, metal art