Mecpow CUT50 Home Use Plasma Cutter, Non-Touch Pilot Arc, 110/220V Dual Voltage IGBT Inverter, 0.6'' Cutting Thickness, 2T for Beginners DIY
Best price now
$189.99at WalmartChecked Nov 10
Prices are checked against each store and labelled with when.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Mecpow CUT50 is a dual-voltage (110/220V) IGBT inverter plasma cutter aimed at home shops and beginners. Its non-touch pilot arc starts the arc without contacting the metal, so it cuts painted, rusty or expanded steel and mesh without a clean ground spot. It cuts roughly 5mm clean on 110V and up to about 15mm on 220V, using ordinary compressed air. Against basic high-frequency units it trades a little top-end power for cleaner starts and less electrical interference; it is not a substitute for a heavy 220V shop machine on thick plate.
In stockSold by GEEK FLASHReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The Mecpow CUT50 is a home-use plasma cutter with a non-touch pilot arc torch. It uses a non-high-frequency, non-interference design and back-blow start technology. It runs on standard compressed air and works on dual voltage, 110V or 220V.
The torch cuts stainless steel, aluminum, and painted or rusted surfaces, leaving minimal slag. It handles thicknesses from 5mm to 15mm. Arc timing and current are adjustable, and an LED display shows the settings.
It has a plug-and-play air connector and a built-in regulator, so setup takes about 30 seconds. At 5.2 kg, it is lightweight and portable.
