What is a 60-tooth blade best for?

Fine-finish crosscuts and trim in plywood, laminate, chipboard and solid wood. It is slower than a low-tooth framing blade in thick lumber.

Will it fit my circular saw?

It fits saws that take an 8-1/4 inch blade with a matching arbor. Check your saw's arbor size before buying, since the listing does not state it here.

Can it cut laminate and plywood without splintering?

Yes, the high tooth count is designed for clean edges in those materials. Support the workpiece and use a slow feed for the best result.

Is it good for ripping framing lumber?

It can, but slowly. A lower-tooth ripping blade cuts thick construction lumber faster and with less burn.

Does it need sharpening?

Carbide tips can be resharpened by a saw shop. Most owners replace it instead once it dulls, given its low cost.

Where is the Hyper Tough Circular Saw Blade, 8-1/4 in, 60T cheapest?

At Walmart, for $10.97, as of our latest check.

What do buyers say about the Hyper Tough Circular Saw Blade, 8-1/4 in, 60T?

Rated 4.7 out of 5 from 29 ratings.

Hyper Tough Circular Saw Blade, 8-1/4 in, 60T

Best price now

$10.97at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Hyper Tough Circular Saw Blade, 8-1/4 in, 60T

Best price now

$10.97at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $10.97 at Walmart on Nov 12.

Our take on the Hyper Tough Circular Saw Blade, 8-1/4 in, 60T

This is an 8-1/4 inch circular saw blade with 60 carbide-tipped teeth, aimed at fine-finish cuts in wood. The high tooth count trades speed for a smoother edge, so it suits trim, plywood, laminate and finish work more than fast framing cuts. It fits corded and cordless circular saws, and Hyper Tough sells it as a low-cost alternative to name-brand fine-finish blades. Owners rate it well, though the thin kerf and carbide quality are the usual points of debate against premium blades.

Best forFinish cuts in plywood, laminate and trimDIYers and home repair workOwners of 8-1/4 inch corded or cordless sawsCutting construction lumber, hardwood and softwood cleanly

Pros

60 teeth give a smooth, fine-finish cut
Carbide tips hold an edge longer than steel teeth
Fits both corded and cordless circular saws
Handles plywood, chipboard, laminate and solid wood
Strong owner ratings for the price class

Cons

High tooth count cuts slower than a framing blade
Not the choice for fast ripping or thick rough lumber
Thin blade can deflect in hard knots or wet wood
Carbide quality is below premium brands, so it dulls sooner

Hyper Tough Circular Saw Blade, 8-1/4 in, 60T prices at every store

WalmartNew
In stock
$10.97Checked Nov 12
Visit Walmart

What reviewers say

4.7 / 529 ratings

Owners rate this blade highly, mostly for clean cuts in plywood and trim at a low cost. Some note it dulls faster than premium blades and can wander in tough stock.

What people mention

Cut qualityPraisedOwners say the 60 teeth leave smooth edges in plywood, laminate and trim.
ValuePraisedBuyers call it a good low-cost blade for occasional home projects.
DurabilityCriticisedSome owners report it dulls faster than premium carbide blades.
Blade stabilityMixedA few say the thin blade can wander or burn in hard, thick stock.

About the Hyper Tough Circular Saw Blade, 8-1/4 in, 60T

This 8-1/4 inch circular saw blade has 60 carbide-tipped teeth. The tooth configuration is designed for fine-finish wood cutting, and the high tooth count gives cleaner cuts in wood-based materials.

It cuts construction lumber, hardwood, softwood, plywood, chipboard, and laminate. The blade fits both corded and cordless circular saws.

Blade size: 8-1/4 in (8.25")
Teeth: 60, carbide-tipped
Cut type: Fine-finish wood cutting
Materials: Construction lumber, hardwood, softwood, plywood, chipboard, laminate
Compatibility: Corded and cordless circular saws

Specifications

size: 8.25"Source

Questions and answers

What is a 60-tooth blade best for?: Fine-finish crosscuts and trim in plywood, laminate, chipboard and solid wood. It is slower than a low-tooth framing blade in thick lumber.
Will it fit my circular saw?: It fits saws that take an 8-1/4 inch blade with a matching arbor. Check your saw's arbor size before buying, since the listing does not state it here.
Can it cut laminate and plywood without splintering?: Yes, the high tooth count is designed for clean edges in those materials. Support the workpiece and use a slow feed for the best result.
Is it good for ripping framing lumber?: It can, but slowly. A lower-tooth ripping blade cuts thick construction lumber faster and with less burn.
Does it need sharpening?: Carbide tips can be resharpened by a saw shop. Most owners replace it instead once it dulls, given its low cost.
Where is the Hyper Tough Circular Saw Blade, 8-1/4 in, 60T cheapest?: At Walmart, for $10.97, as of our latest check.
What do buyers say about the Hyper Tough Circular Saw Blade, 8-1/4 in, 60T?: Rated 4.7 out of 5 from 29 ratings.