Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai › Inland
Inland
Inland PETG-CF 3D Printer Filament 1.75mm 1kg

Inland PETG-CF 3D Printer Filament 1.75mm 1kg

Best price now

$17.99at Micro CenterObserved at 1:25 PM

Prices are checked against each store and labelled with when.

Visit Micro Center

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Our take on the Inland PETG-CF 3D Printer Filament 1.75mm 1kg

Inland PETG-CF is a carbon-fiber-filled PETG filament on a 1 kg spool, 1.75 mm diameter, for FDM printers. The carbon fiber adds stiffness and a matte, slightly textured finish compared with plain PETG, while keeping PETG's moderate toughness and moisture resistance. It needs a hardened nozzle and a decent part-cooling setup. At $17.99 at Micro Center as of November 4, 2026, it sits at the low end for carbon-fiber PETG, which usually runs well above $25 per kilo.

Best forFunctional parts that need stiffness, like brackets and mountsMakers who want a matte finish without post-processingPrinter owners with a hardened steel or ruby nozzleBudget buyers trying carbon-fiber blends for the first time
Pros
  • Stiffer and more dimensionally stable than plain PETG
  • Matte, low-gloss surface hides layer lines
  • Better heat resistance than PLA for car interiors and enclosures
  • Low price for a carbon-fiber blend at $17.99 per kg
  • Prints with familiar PETG settings, no enclosure required
Cons
  • Abrasive filler wears out brass nozzles quickly
  • Brittle compared with unfilled PETG; thin walls can snap
  • Stringing and blobbing are common without tuned retraction
  • Carbon fiber can clog small or long melt zones
  • Limited to one store at the listed price

Inland PETG-CF 3D Printer Filament 1.75mm 1kg prices at every store

  • Micro CenterNew

    In stock

    $17.99Observed at 1:25 PM
    Visit store

Also available at

  • eBayCheck price at eBay

Inland PETG-CF 3D Printer Filament 1.75mm 1kg price history

Lowest price we've seen: $17.99 on Nov 4 at Micro Center. Tracked across 1 store since Nov 4.

What reviewers say

Owners of Inland's carbon-fiber PETG generally report good stiffness and a clean matte look for the money, with the usual PETG tuning quirks. Complaints center on stringing and nozzle wear rather than print quality.

Pros
  • Stiff, strong parts for the price
  • Matte finish looks good on functional prints
  • Prints reliably once retraction is dialed in
Cons
  • Strings heavily at default PETG settings
  • Eats brass nozzles; hardened nozzle is a must
  • Occasional diameter variance and brittleness on the spool

Specifications

Type
Filament
Printing Material Type
PETG-CF (Polyethylene Terephthalate Glycol Carbon Fiber)
Printing Technology
FDM (Fused Deposition Modeling)
Filament Diameter
1.75 mm
Filament Type
PETG-CF (Polyethylene Terephthalate Glycol Carbon Fiber)
Weight
2.20 lbs. (1.00 kg)
Included Accessories
Spool

Questions and answers

Do I need a hardened nozzle for this filament?
Yes. The carbon fiber is abrasive and will wear a brass nozzle quickly. Use a hardened steel or ruby-tipped nozzle.
What temperatures should I print Inland PETG-CF at?
Start around 240-250°C at the nozzle and 70-80°C on the bed, then tune from there. Keep part cooling moderate to preserve layer adhesion.
Is it worth it over plain PETG?
If you need extra stiffness or a matte finish, yes, especially at $17.99. For flexible or impact-prone parts, plain PETG is tougher and cheaper.
Does it need an enclosure?
No. PETG-CF prints fine on open printers. An enclosure mainly helps with large parts and warping.
Is it food safe or safe for indoor use?
No. Carbon-fiber filament is not considered food safe, and sanding printed parts releases fine dust. Wear a mask when finishing.
When is the price lowest?
Micro Center listed it at $17.99 as of November 4, 2026. Filament prices move with sales, so check the price history before buying more than one spool.
Where is the Inland PETG-CF 3D Printer Filament 1.75mm 1kg cheapest?
At Micro Center, for $17.99, as of our latest check.
Where can I buy the Inland PETG-CF 3D Printer Filament 1.75mm 1kg?
2 stores we checked sell it, including Micro Center, eBay.

More from Inland

  • I
    Inland 12-Outlet Power Strip 3201
    Inland 12-Outlet Power Strip 3201
  • I
    Inland PETG-ESD 3D Printer Filament 1.75mm 1kg
    Inland PETG-ESD 3D Printer Filament 1.75mm 1kg
  • I
    Inland PETG+ 1.75mm 3D Printer Filament Spool
    Inland PETG+ 1.75mm 3D Printer Filament Spool
All Inland deals and products →