

Prices are checked against each store and labelled with when.
The Kuman 2-Channel 5V Relay Module is an expansion board that lets a 3.3V or 5V microcontroller switch two high-current loads. Each channel uses an optocoupler for electrical isolation and draws roughly 15-20mA, so it can be driven directly from Arduino, Raspberry Pi, STM32 or similar boards. The relays are rated 10A at 250V AC or 30V DC, enough for lamps, fans, small appliances and monitor or TV power. It is a low-level trigger board, meaning the relay engages when the input is pulled low, which matters when wiring it to logic that idles high.
In stockSold by StartExplorerReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners of similar Kuman relay boards generally find them reliable for hobby and light industrial switching, with isolation doing its job. Complaints center on the low-level trigger logic and on documentation that is thin for beginners.
This is a 2-channel 5V relay module that lets a low-voltage microcontroller switch higher-current devices. Each relay draws 15-20 mA, so it can be driven directly by Arduino, Raspberry Pi, STM32 and MEGA 2560 boards, as well as other DSP, ARM, PIC and AVR microcontrollers.
An optocoupler provides electrical isolation, keeping noise, voltage spikes and back-EMF from reaching the control board. The module triggers on a low level signal.
Each relay is rated for 10A at 250V AC or 30V DC. The terminals are clearly labeled and the board uses a standard interface for installation. It is used for home automation such as lights, fans and appliances, for office equipment, audio systems, automotive electronics and industrial control.
It checks today's price at every store, compares the alternatives and answers in about a minute.