This magnetic embroidery hoop fits compatible Brother embroidery machines. It uses long-bar magnets, which cover a larger magnetic area than round magnets. They apply even pressure across the frame to hold fabric flat.
The solid metal bottom frame has a soft coating that helps prevent scratches and slipping. The hoop leaves no hoop marks on fabric. To adjust the fabric, lift and reposition individual magnets without removing the whole hoop.
It attaches without screws or clamps, and it can hold thick or slippery materials such as denim, towels and slippery knits. To use it, mark the center of the embroidery area on the fabric. Place the backing paper and fabric on the frame, then secure them with the long magnets. Insert the frame into the machine slot and start embroidering.
- Type
- Magnetic embroidery hoop with long-bar magnets
- Models
- SA431MK, SA432MK, SA434MK, or the 3in1-AMK set
- SA431MK
- 40x60mm hoop; 4 long-bar magnets
- SA432MK
- 100x100mm hoop; 8 long-bar magnets
- SA434MK
- 100x170mm hoop; 8 long-bar magnets
- 3in1-AMK
- SA431MK, SA432MK and SA434MK together
- Frame
- Solid metal bottom frame with soft coating
- Compatibility
- Brother SE725, SE700, SE625, SE600, SE630, SE400, SE425, SE350, SE270D, PE545, PE535, PE550D, PE540D, PE500, PE525, LB6800, LB5000, M380D, NS1750D, NS1850D
- In the box
- Magnetic embroidery hoop, long-bar magnets and 1 grid template per hoop