Mytee 8070 Lite Heated Carpet Extractor

Heated extraction that fits in any vehicle.

4-gallon tanks, a 1,000 watt heater and one 25' power cord, on a push handle with a storage basket.

Hot water on board

The 1,000 watt in-line heater brings water up to 210°F to break up grease and dirt.

210°F max. water temp

Runs on one cord

Pump, vacuum and heater all run from a single 25' 12/3 power cord.

19 A at 115 V

• Small enough to carry

At 45 lb it fits in just about any vehicle, and the push handle carries the hose and tool.

45 lb machine weight

What it is

The Mytee 8070 Mytee Lite is a heated detailing extractor for auto detailing, upholstery spotting and small carpet jobs. It pairs a 120 PSI diaphragm pump (1.3 GPM) with a single 3-stage vacuum rated at 100 CFM and 130" of water lift, and a 1,000 watt in-line heater that brings water up to 210°F. Mytee calls it its best-selling detailing extractor, and it was the first in the industry with an on-board heater.

Jobs it suits

Its 4-gallon solution and recovery tanks suit mobile detailing: cars, boats and planes, couches and chairs, and spots and spills in homes and offices. With the optional 10" 8390-EZ carpet wand it also handles small rooms of carpet. The solution tank fills from any standard faucet with the faucet fill hose, and a recovery tank drain hose empties it.

Power and portability

The pump, vacuum and heater all run on one 25' 12/3 power cord and draw 19 A at 115 V, so you only need one outlet. At 45 lb, with 6" rear wheels and 2" locking front casters, it fits in just about any vehicle. The push handle has a deep basket, hose hanger and cord wrap, and the body is roto-molded polyethylene.

What comes with it

<p styl