Mytee 8070 Lite Heated Upholstery Extractor

Mytee 8070 Lite Heated Upholstery Extractor

This is a heated upholstery extractor designed to clean car seats, carpets, and interior fabrics. I keep one of these on hand any time I need to pull embedded dirt out of cloth seats or a stained carpet mat, and the heat is what makes the difference. A cold-water extractor still pulls soil out, but hot water breaks down oils and grime faster, so you spend less time working the same spot.

You get a 4-gallon solution tank and a 4-gallon recovery tank, so you can run a full interior without stopping to refill every few minutes. The 1,000-watt heater brings your water up to 210°F, and the 120-PSI pump pushes it through the included 4-inch Air Lite upholstery tool with enough pressure to break up ground-in stains without soaking the padding underneath.

This unit does not have a vacuum shut-off switch, so keep an eye on your recovery tank level while you work.

Features

• Heats water up to 210°F for faster stain and odor removal

• 4-gallon solution tank and 4-gallon recovery tank

• 120 PSI diaphragm pump rated at 1.3 GPM

• Single 3-stage vacuum motor rated at 100 CFM and 130 inches of water lift

• 15-foot hose combo with a 4-inch Air Lite upholstery tool

• Rear 6-inch wheels and front 2-inch locking casters for easy positioning

• 25 foot 12/3 power cord

How to use it

• Fill the solution tank with hot water and your chosen upholstery cleaning solution.

• Plug in the unit and let the heater bring the water up to temperature before you start.

• Attach the 4-inch Air Lite upholstery tool to the hose combo.

• Work in small, overlapping sections. Trigger the tool to spray the solution, then pull it back slowly to extract.

• Check the recovery tank often since this model has no automatic shut-off.

• Empty the recovery tank and rinse it out once you finish.