
Nilight 12V 140A Smart Dual Battery Isolator VSR with LED Voltage Display
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Nilight 12V 140A is a voltage-sensitive relay that lets one alternator charge a starting battery and an auxiliary battery. It cuts in at 13.3V to link the batteries and cuts out at 12.8V to isolate them, so the starting battery stays reserved for cranking. An LED display shows live voltage, and the sealed IP66 housing is built for dust, water and vibration. It suits camper vans, RVs, boats and off-road rigs running accessories off a second battery. It is a simple automatic relay rather than a DC-DC charger, and it is not compatible with lithium batteries.
In stockReturn policy
The Nilight Smart Dual Battery Isolator is a voltage sensitive relay for 12-volt dual battery systems. It lets one alternator charge two batteries at once: once the starting battery is charged, the relay cuts in at 13.3 volts and begins charging the auxiliary battery. When the voltage drops to 12.8 volts, it cuts out, so the starting battery stays charged and ready to start the vehicle.
The isolator has a metal and plastic casing with a silicone seal and an IP66 waterproof rating, for use in dusty, wet and vibrating environments. Terminals are screw type, the connector is quick connect, and the contact type is normally open. An LED display shows the current voltage status in real time.
It is suitable for 12-volt camper vans, trucks, caravans, RVs, ATVs, UTVs, boats and camping applications, and lets accessories run from a separate battery while the engine is off. It is not compatible with lithium batteries.
It checks today's price at every store, compares the alternatives and answers in about a minute.







