A Bluetooth OBD-II diagnostic interface scanner. It plugs into a car's OBD-II connector to read and clear diagnostic codes, turn off the MIL (the "Check Engine" light) and display live sensor data.
The adapter is a small, block-shaped unit with a molded OBD-II plug on one end and a flat, rectangular body. The face has a printed label panel in orange and blue, with a row of five round indicator openings along the top edge, and the sides of the casing are ribbed. "OBDII" is molded into the back of the housing.
It runs on DC 12V at 40 mA and has a built-in protection circuit against short circuit and overvoltage. Indicator LEDs show OBD input/output (Tx/Rx) and RS232 input/output (Tx/Rx). The output interface is serial RS232 at 9600 or 38400 baud, and the unit supports ISO 9141-2, ISO 14230-4 KWP (5 baud and fast init) and ISO 15765-4 (11-bit/29-bit, 500K/250K baud).
- Type
- Bluetooth OBD-II diagnostic interface scanner
- Supported protocols
- ISO 9141-2, ISO 14230-4 KWP (5 baud and fast init), ISO 15765-4 (11-bit/29-bit, 500K/250K baud)
- Output interface
- Serial RS232
- Baud rate
- 9600 or 38400
- Indicators
- LEDs for OBD input/output (Tx/Rx) and RS232 input/output (Tx/Rx)
- Working voltage
- DC 12V
- Working current
- 40 mA
- Protection
- Built-in short circuit and overvoltage protection circuit
- Functions
- Read and clear diagnostic codes, turn off MIL, display live sensor data
- Code library
- More than 3000 general code definitions
- Live data
- Engine RPM, calculated load, coolant temperature, fuel system status, speed, short- and long-term fuel trim, intake manifold pressure, fuel injection advance time, intake air temperature, air velocity
- Weight
- 70 g (2.5 oz)