Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Oregon 80TXL046G is a 46-drive-link SpeedCut Nano loop in .325 low-profile pitch and .043 gauge, built for battery and small gas saws up to 38cc. Its micro-chisel cutters are blued for corrosion resistance and cut clean, smooth-walled kerfs, while the reshaped chassis is tuned to keep low-torque saws from stalling and to stretch battery runtime. It only works as part of the SpeedCut Nano system, paired with an Oregon Nano bar and sprocket, so it is not a drop-in replacement for standard .325 chain. Owners of top-handle and small rear-handle saws get a faster, smoother cut than stock low-profile chain, at the cost of being locked into one bar-and-sprocket family.
In stockReturn policy
Owners of small battery and gas saws report the Nano loop cuts faster and smoother than the stock low-profile chain and stalls less under load. The main complaint is the system lock-in: it will not run on a standard .325 bar and sprocket.
The Oregon 80TXL046G SpeedCut Nano saw chain is a 46-drive-link chain with .325" low-profile pitch. It is designed for battery and low-powered gas saws up to 38cc. It works with the SpeedCut Nano guide bar and sprocket as a complete cutting system.
The chain chassis is built for saws in the 1-3 HP range. It increases cutting speed, extends battery runtime and reduces the tendency to stall. Reshaped micro-chisel cutters give a precise cut and a good surface finish. Blued cutters protect against corrosion.
Expanded top-plate filing indicators and depth gauge filing indicators make accurate sharpening easier. The chain must be used with an Oregon SpeedCut Nano guide bar and sprocket. It is not compatible with standard .325" pitch cutting systems.
