It checks today's price at every store, compares the alternatives and answers in about a minute.
The Ortur Laser Master 3 is a desktop diode laser engraver and cutter sold with a 10W, 20W or 40W module. It runs at up to 20,000 mm/min and has a 400 x 380 mm working area, or 400 x 400 mm on the 10W. The 20W head combines four diode beams into a 0.08 x 0.08 mm spot, so it cuts and marks faster and deeper than the single-beam 10W. It suits hobbyists and small shops engraving wood, leather, acrylic and coated metal; it is an open-frame machine, so buyers who need enclosed, fume-controlled operation should look at enclosed rivals instead.
In stockReturn policy
Owners of the LM3 line generally rate it as a solid mid-range diode engraver with good speed and a roomy bed for the class. Complaints center on the open frame, fumes, and the tuning needed for cutting and metal marking.
The Ortur Laser Master 3 is a desktop diode laser engraver and cutter. It has an open frame and an integrated air assist system with adjustable airflow control. It engraves and cuts wood, acrylic, leather and coated metals. The engraving speed runs at up to 20,000 mm/min.
The 20W module combines four diode beams into a compressed 0.08 × 0.08 mm spot and produces 256 engraving greyscales. It can create 380+ colors on stainless steel depending on parameters. Double cooling fans run at up to 10,000 rpm, and the service life is estimated at up to 10,000 hours, subject to operating conditions and maintenance.
A quick focus stick sets focus before each job. Air-guided blinds and built-in tubes control cooling airflow to reduce dust buildup on the lens and cut wear. The machine has 8 safety features, including USB connection monitoring and current/voltage controls. It is open-frame and requires supervised operation, eye protection, an enclosure, fire precautions and access control.