This is a pen-style brake fluid tester for checking the moisture content of DOT3, DOT4, and DOT5 brake fluid. It measures moisture from 0% to 4% and uses LED indicators to show the percentage of water in the fluid. Results appear in seconds, and the tester automatically powers off after 12 seconds of inactivity.
Five LED indicators show the water percentage: green for none, green and yellow for less than 1%, and additional yellow and red LEDs for approximately 2%, 3%, and 4%. At approximately 3%, the brake fluid should be changed; at approximately 4%, change it immediately. The tester is CE and RoHS approved.
To test, remove the brake fluid reservoir cap and the tester's probe cap, then press the power button; a green LED lights up. Dip the full length of the metal probes into the brake fluid and match the LED colors to the chart after one second. Replace the battery if the green LED no longer lights after pressing the button, and rinse the probe with tap water after each use.
- Compatibility
- DOT3, DOT4, DOT5 brake fluid
- Moisture Range
- 0%–4%
- Indicators
- 5 LEDs
- LED Readout
- Green = none; Green/Yellow <1%; additional yellow/red LEDs approx. 2%, 3%, 4%
- Auto Shutoff
- 12 seconds of inactivity
- Power
- 1 x 1.5V AAA battery (included)
- Probe
- Metal
- Certification
- CE, RoHS
- Probe Care
- Rinse with tap water after each use
- Safety
- Wash skin or clothing with water after brake fluid contact; do not expose brake fluid to the atmosphere for long periods because it is highly hygroscopic