Is PolyLite PETG good for beginners?

Yes, if you can print at PETG temperatures. It warps less than ABS and needs no enclosure, but it strings more than PLA, so expect some retraction tuning.

How is it different from PLA?

PETG is tougher, more flexible and handles much higher heat, around 70–80 °C versus roughly 55 °C for PLA. PLA is easier to print and gives sharper detail.

How is it different from ABS or ASA?

PETG is easier and less smelly to print and does not need an enclosure, but ABS and ASA take more heat and can be smoothed with acetone.

Yes. PETG is very hygroscopic, so dry the spool before long prints and store it sealed with desiccant between uses.

Will it work with AMS and multi-material systems?

Polymaker says it feeds reliably in AMS and multi-material setups. Keep the filament dry, since moisture causes jams and stringing.

What is on the spool and in the box?

One 1 kg spool of 1.75 mm PETG, vacuum sealed in a resealable bag with desiccant. No nozzle or accessories are included.

Where is the Polymaker PolyLite PETG 1.75mm 1kg cheapest?

At B&H Photo-Video-Audio, for $18.99, 17% under what the other stores charge, as of our latest check.

Where can I buy the Polymaker PolyLite PETG 1.75mm 1kg?

10 stores we checked sell it, including B&H Photo-Video-Audio, Texas Filament Supply, MatterHackers, Tiny Machines 3D, HartSmart Products.

Polymaker PolyLite PETG 1.75mm 1kg

Best price now

$18.99at B&H Photo-Video-AudioChecked 1 h ago

17% under what the other stores charge

Compared across 9 stores. Prices are checked against each store and labelled with when.

Visit B&H Photo-Video-Audio

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

What reviewers say

Owners of PolyLite PETG generally report clean prints, good layer adhesion and low warping once settings are dialed in. The recurring complaint is moisture: filament that has sat open strings heavily and needs drying.

What people mention

StrengthPraisedOwners say parts come out tough and hold up in functional use better than PLA.
WarpingPraisedReviewers report little lifting on large flat prints compared with ABS.
StringingCriticisedMany say the filament strings and oozes, especially after it has been left out.
MoistureCriticisedBuyers note it absorbs water quickly and needs drying to print cleanly.
Print speedMixedThe high-speed claim holds on well-tuned machines, but slower profiles are needed on stock setups.
Spool windingPraisedOwners describe the spool as neatly wound with few tangles.

About the Polymaker PolyLite PETG 1.75mm 1kg

Polymaker PolyLite PETG is a 1.75 mm PETG filament for FDM 3D printers, supplied on a 1 kg spool. It uses a high-flow formula that extrudes cleanly at speeds up to 300 mm/s, or over 500 mm/s with high-flow nozzles. The formula is designed for strong inter-layer bonding, low warping and reliable feeding during long prints.

The filament is suited to prototypes and end-use parts such as gears, brackets, fixtures, outdoor tools, sports accessories and cosplay props. It prints on most FDM printers without an enclosure and works with AMS and multi-material systems.

PETG is very hygroscopic, so it should be kept dry to prevent excessive stringing.

Material

PETG (polyethylene terephthalate glycol)

Diameter

1.75 mm

Weight

1 kg

Technology

FDM

Print speed

Up to 300 mm/s; over 500 mm/s with high-flow nozzles

Skill level