A programmable digital-control buck-boost DC power supply module. It takes an input of 5.0-30 V and delivers an adjustable output of 0.5-30 V, stepping the voltage up or down as needed. Output current runs at 3 A continuously, reaches 4 A with enhanced heat dissipation, and the current limit is adjustable from 0 to 4 A.
The front panel carries an LCD, two round buttons and a silver rotary knob; a four-point screw terminal block sits at the back for connections. The LCD shows input and output voltage, output current, output power, output capacity and output time. A thickened heat sink handles cooling, and a Tt filter keeps output ripple low.
Voltage and current limits are set numerically through the controls. The input is protected against reverse connection, and the output is anti-backflow, so no extra diode is needed when charging a battery. Software protection thresholds are adjustable, and the output shuts off automatically when working parameters exceed them. The module can be set to be on or off by default.
- Type
- Programmable digital-control buck-boost DC regulated power supply
- Input voltage
- 5.0-30 V
- Output voltage
- 0.5-30 V, adjustable
- Output current
- 3 A continuous; up to 4 A with enhanced heat dissipation
- Current limit
- Adjustable 0-4 A
- Output power
- 35 W natural heat dissipation; 50 W enhanced heat dissipation
- Dimensions
- 3.1 x 1.7 x 1 in (79 x 43 x 26 mm)
- Weight
- 93 g (shipping weight)
- Display
- LCD showing input/output voltage, output current, output power, output capacity and output time
- Controls
- Two round buttons and a rotary knob
- Terminals
- Four-point screw terminal block at the back
- Protection
- Input reverse-connection protection; output anti-backflow; adjustable software protection thresholds with automatic output shutoff
- Filter
- Tt filter for low output ripple
- Heat sink
- Thickened
- Startup
- Default on/off setting
- In the box
- Regulated power supply x1