Prusa CORE One L+ 8-Toolhead Enclosed 3D Printer

Original Prusa CORE One L+ 8-Toolhead 3D Printer | 300×300×330 mm Heated Chamber, Air Filter Ready

Print large parts in up to eight materials without a purge tower eating the spool. The Original Prusa CORE One L+ 8-Toolhead takes the enclosed CORE One L+ platform — 300 × 300 × 330 mm of heated-chamber CoreXY — and adds Bondtech INDX with eight independent toolheads. Load colors, soluble supports, break-away supports, and mixed nozzle sizes at once. Functional parts with clean internal channels, mixed rigid/flex details, and multi-color surfaces come off the bed as one piece instead of a glue-up.

This is the L+ generation: nozzle wiper, GT1.5 belts, and the latest firmware on a factory-assembled, pre-calibrated machine. Eight toolheads is the full INDX rack on CORE One L+ — days-long unattended runs from multiple spools, with no need to swap tools by hand mid-job.

Key Specifications

• Build Volume: 300 × 300 × 330 mm (29.7 L); About 298 × 275 × 330 mm With INDX Toolheads Installed

• Architecture: Enclosed CoreXY, GT1.5 Belts, Input Shaper, Phase Stepping

• Tool System: 8 Independent INDX Toolheads on Bondtech Smart Head

• Tool Swap: About 12 Seconds, About 0.013 g Waste

• Max Nozzle / Bed / Chamber: 300 °C (INDX Toolheads) / 120 °C / 60 °C Active Convection

• Air Filter (Optional): Advanced Filtration System — HEPA 99.9% + Activated Carbon

• Calibration: LoadCell First Layer Plus Tool-Offset Sensor