What is included in the kit?

The box holds the pump end, the 1.5 HP 220V three-wire motor and the starter box. A pressure tank, check valve and wiring are not included, so check your setup before installing.

How much water does it deliver?

Flow is about 13 GPM down to 150 ft of head, easing to roughly 12.5 GPM at 200 ft and about 5 GPM near the 550 ft limit. Match it to your well depth and household demand.

Will it fit my well casing?

The pump is 3.86 inches in diameter and fits casing 4 inches wide and larger. Narrower casing will not take it.

Does it need a pressure tank?

Yes. Pair it with a pressure tank sized for your system; RPS recommends confirming the size with a pump specialist before buying.

Is it safe for drinking water?

It is NSF Drinking Water Certified and UL Listed, so it is rated for potable water for households and livestock.

Can I wire it myself?

It is a three-wire, single-phase 220V pump with a starter box that wires to your breaker or switch. If you are not comfortable with 220V wiring, use a licensed electrician.

What do buyers say about the RPS 07RPS15 Deep Well Submersible Pump Kit 1.5 HP 220V?

Rated 4.9 out of 5 from 207 ratings. Buyers like: Easy DIY install; pump started right up on power; Helpful, responsive customer service and sizing help; Fast shipping, including quick 2-day warranty replacements. Common complaints: One pump burnt out within a year (replaced under warranty); Missing parts in kits (check valve/coupler mismatch, torque arrestor, pitless adapter).

RPS 07RPS15 Deep Well Submersible Price History: Lowest $1,519.99

Q: Where is the RPS 07RPS15 Deep Well Submersible Pump Kit 1.5 HP 220V cheapest?

At RPS Water Pumps, for $1,519.99, as of our latest check.

What reviewers say

4.9 / 5207 ratings

Owners rate the pump 4.9 out of 5 and mostly describe straightforward DIY installs, immediate startup and flow that matches the spec. Complaints center on incomplete kits and the occasional early burnout, which warranty replacements covered.

What people mention

InstallationPraisedBuyers say it goes in easily as a DIY job and starts right up once wired.
Build qualityPraisedOwners describe the stainless body and motor as solid and durable.
Flow performancePraisedReviewers report output matching the published GPM-at-head table.
Kit contentsCriticisedSome kits arrived missing a check valve, coupler, torque arrestor or pitless adapter, or with mismatched parts.
DurabilityMixedMost pumps run for years, but at least one burned out within a year and was replaced under warranty.
SizingMixedSome orders shipped the wrong pump size, and buyers were unsure whether the kit was complete.

From RPS Water Pumps

1.5 HP 220V 3-wire submersible well pump kit with starter box
Rated up to 550 ft total head, 5–13 GPM flow
Built for continuous duty in household wells, agriculture, irrigation and industrial use
304 stainless steel outer body with engineered composite impellers
NSF Drinking Water Certified and UL Listed
3.86" diameter, fits well casing 4 inches wide and larger

Materials: 304 stainless steel outer body; engineered composite impellers; 100% stainless steel laser welded motor housing
Fit: 3.86" diameter, made to fit in well casing 4 inches wide and larger
Sizing: Add well depth to the PSI in feet of head to get your Total Head (10 PSI = 23 ft, 20 PSI = 46 ft, 30 PSI = 70 ft, 40 PSI = 90 ft, 50 PSI = 115 ft, 60 PSI = 140
Guarantee: RPS 2-year warranty: RPS will repair or replace any defective part(s) at no cost within 24 months of purchase. Water Assurance money-back guarantee when the sys
Returns: Full refund up to 30 days after purchase if unused and in new condition; you pay return shipping or return in person. After 30 days up to 60 days, store credit
Shipping: Free shipping on orders over the threshold, arriving in 3-5 business days anywhere in the contiguous USA; Next Day Air available; contact RPS for custom timelin
In the box: Pump end, Motor, Starter box

About the RPS 07RPS15 Deep Well Submersible Pump Kit 1.5 HP 220V

This is a 1.5 HP, 220V submersible deep well pump kit. It is used for household wells, agriculture, irrigation and industrial water supply, and it can pump from wells, tanks or ponds. It is rated for continuous duty and up to 550 feet of total head.

The outer body is 304 stainless steel, and the impellers are engineered composite. The motor housing is 100% stainless steel and laser welded. The pump is NSF Drinking Water Certified and UL Listed.

The motor is 3-wire single phase. A starter box wires the pump directly to a breaker or switch. Use it with a pressure tank. To find total head, add the well depth to the pressure tank's PSI converted to feet of head.

Motor: 1.5 HP, 220V, 3-wire single phase
Max total head: 550 feet
Flow rate: 13.2 GPM from no head to 150 ft; 12.5 at 200 ft; 11.5 at 250 ft; 10.5 at 300 ft; 9.5 at 350 ft; 8.5 at 400 ft; 7.5 at 450 ft; 6.5 at 500 ft; 5 at 550 ft
Duty: Continuous duty
Body material: 304 stainless steel outer body
Impellers: Engineered composite
Motor housing: 100% stainless steel, laser welded
Diameter: 3.86 inches
Well casing: Fits 4-inch casing and larger
Certifications: NSF Drinking Water Certified, UL Listed
PSI to head: 10 PSI = 23 ft, 20 PSI = 46 ft, 30 PSI = 70 ft, 40 PSI = 90 ft, 50 PSI = 115 ft, 60 PSI = 140 ft
In the box: Pump end, motor, starter box

What buyers say

Buyers like

Easy DIY install; pump started right up on power
Helpful, responsive customer service and sizing help
Fast shipping, including quick 2-day warranty replacements
Build quality feels solid and durable
Flow at head performs per the performance spec
Clean, cold water and continuous pumping

Buyers complain about

One pump burnt out within a year (replaced under warranty)
Missing parts in kits (check valve/coupler mismatch, torque arrestor, pitless adapter)
Kit short on electrical tape
Confusion over what a complete kit includes (expected a complete pump)
Wrong pump size received in some orders