- Is MERV 13 too restrictive for my furnace?
- For most modern residential systems MERV 13 is fine, but older or undersized blowers can lose airflow. If your system is near its static-pressure limit or you have a 1-inch slot, check with an HVAC tech before stepping up from MERV 8.
- What size filter do I actually need?
- This filter is nominal 24 x 24 x 1 inch but measures 23.75 x 23.75 x 1 inch. Measure your filter slot and the old filter's printed size; if it says 24 x 24 x 1, this should fit.
- How often should I change it?
- Every 2 to 3 months is typical, and sooner in dusty homes, with pets, or during wildfire smoke. MERV 13 media loads faster than lower-rated filters, so check monthly.
- How does MERV 13 compare to MERV 8 or MERV 11?
- MERV 13 catches finer particles, including smoke and bacteria-sized ones, than MERV 8 or 11. The trade-off is more airflow resistance and faster loading.
- Is $53.97 for four a good price?
- That works out to about $13.49 per filter, which is in line with other MERV 13 four-packs in this size. Stock up when it dips below that per-filter cost.
- What is in the box?
- Four pleated 24 x 24 x 1 inch MERV 13 filters. No frame or installation hardware is included.
- Where is the Simply 24 in x 24 in x 1 in MERV 13 FPR Furnace Air Filter 4-Pack cheapest?
- At The Home Depot, for $53.97, as of our latest check.