This solar-powered wall light has a built-in motion sensor and light sensor. In the dark, it turns on automatically when it detects motion within 8 m (26.25 ft). It turns off after about 30 seconds with no motion. The lamp uses 100 LED beads.
The separate solar panel connects to the lamp unit with a 5 m (16.40 ft) wire. This lets you place the panel in direct sunlight and mount the lamp under the eaves. The panel rotates 90° vertically and 360° horizontally to adjust its exposure to sunlight. A full charge takes about 6 hours and gives over 10 hours of runtime.
The light is rated IP65 waterproof and suits indoor and outdoor use. It can be used on stairs and at an entryway, doorway or garage.
- Product type
- Solar powered motion sensor wall light
- Material
- ABS
- LED beads
- 100 pcs
- Brightness
- 260 LM
- Sensing distance
- 5-8 m (16.40-26.25 ft), influenced by temperature and humidity
- Auto shut-off
- About 30 seconds after no motion is detected
- Solar panel
- 5.5V/1W, polycrystalline silicon
- Battery
- Built-in 3.7V/1200mAh lithium battery
- Charge time
- 6 hours when fully charged
- Runtime
- Over 10 hours on a full charge
- Water resistance
- IP65
- Lead wire
- 5 m (16.40 ft)
- Light size
- 15 x 5.5 x 14 cm (5.90 x 2.16 x 5.51 in)
- Light weight
- 195 g (0.42 lbs)
- Panel size
- 13 x 4 x 13 cm (5.11 x 1.57 x 5.11 in)
- Panel weight
- 161.5 g (0.35 lbs)
- Package size
- 16 x 9 x 15 cm (6.29 x 3.54 x 5.90 in)
- Package weight
- 442 g (0.98 lbs)
- In the box
- 1 x wall light, 1 x solar panel, 2 x plates, 1 bag of screws, 1 x user manual
