What speeds can it print at?

SUNLU rates it for up to 600mm/s on compatible high-speed printers that are properly configured. On a standard printer, print at the speeds your machine handles well.

Does it need an enclosure?

No. PETG is low-warping and generally prints without an enclosure. A heated bed and good part cooling help.

How does it compare with regular PETG?

It adds a matte finish and higher melt flow for faster printing. Strength and temperature resistance stay in PETG territory.

Is it food safe or dishwasher safe?

SUNLU does not market it as food safe. FDM parts are porous and not recommended for repeated food contact or dishwashing.

What nozzle temperature should I use?

Use PETG settings, typically around 230–250°C nozzle and a heated bed around 70–80°C. Check the spool label for SUNLU's recommended range.

Does it fit a standard printer?

Yes, it is 1.75mm filament and works on most FDM printers that accept 1.75mm and reach PETG temperatures.

SUNLU High-Speed Matte PETG Filament – 1.75mm, 1kg

Best price now

$23.99at PwnCNCChecked Nov 11

Prices are checked against each store and labelled with when.

Visit PwnCNC

SUNLU discount code →

SUNLU High-Speed Matte PETG Filament – 1.75mm, 1kg

Best price now

$23.99at PwnCNCChecked Nov 11

Prices are checked against each store and labelled with when.

Visit PwnCNC

SUNLU discount code →

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $23.99 at PwnCNC on Nov 11.

Our take on the SUNLU High-Speed Matte PETG Filament – 1.75mm, 1kg

SUNLU High-Speed Matte PETG is a 1.75mm filament built for fast FDM printing, with a low-gloss matte surface that hides layer lines. It pairs PETG's strength, impact resistance and low warping with an enhanced melt flow rated for speeds up to 600mm/s on properly configured printers. It suits makers printing functional parts and clean-looking decorative pieces who want speed without a glossy finish. Against standard PETG, it trades some of the usual shine for a matte look and faster flow; against PLA it is tougher and more heat resistant but needs higher nozzle temperatures and slower cooling.

Best forFunctional parts that need impact strengthFast printing on high-speed FDM printersDecorative prints with a low-gloss finishEveryday PETG users wanting less visible layer lines

Pros

Matte, low-gloss surface hides layer lines
PETG strength and impact resistance
Enhanced melt flow for high-speed printing
Low warping and stable flow
Works on most 1.75mm FDM printers

Cons

Needs PETG-level nozzle temperatures
High speeds demand a well-tuned printer
Matte finish can show stringing and blobs
Not as easy to print as PLA

SUNLU High-Speed Matte PETG Filament – 1.75mm, 1kg prices at every store

PwnCNCNew
In stockReturn policy
$23.99Checked Nov 11
Visit PwnCNC

About the SUNLU High-Speed Matte PETG Filament – 1.75mm, 1kg

SUNLU High-Speed Matte PETG Filament is a 1.75mm PETG filament with a soft, low-gloss matte finish. Its enhanced melt flow is designed for high-speed FDM printers. It supports speeds up to 600mm/s on compatible, properly configured machines.

PETG provides strength, impact resistance and warp resistance. The filament is made for consistent flow and dependable layer adhesion. The matte surface helps disguise visible layer lines.

It works with most FDM 3D printers that accept 1.75mm filament and can reach PETG printing temperatures. Actual print speed depends on the printer, hotend flow capacity, nozzle size, slicer profile and model geometry. It suits functional prototypes, brackets and fixtures, organizers, shop accessories, decorative parts, display pieces and product mockups.

Brand: SUNLU
Material: High-Speed Matte PETG
Finish: Matte / low gloss
Diameter: 1.75mm
Diameter tolerance: ±0.02mm
Net weight: 1kg
Filament length: Approximately 330m
Max print speed: Up to 600mm/s on compatible printers
Temp at 50–100mm/s: 205–215°C
Temp at 100–300mm/s: 240–250°C
Temp at 300–600mm/s: 260–270°C
Bed temperature: 70–80°C
Build plate: A heated bed in the recommended range generally gives the best adhesion and dimensional stability. Adhesive may help depending on the build surface.
Compatibility: FDM 3D printers that accept 1.75mm filament and reach PETG printing temperatures

Questions and answers

What speeds can it print at?: SUNLU rates it for up to 600mm/s on compatible high-speed printers that are properly configured. On a standard printer, print at the speeds your machine handles well.
Does it need an enclosure?: No. PETG is low-warping and generally prints without an enclosure. A heated bed and good part cooling help.
How does it compare with regular PETG?: It adds a matte finish and higher melt flow for faster printing. Strength and temperature resistance stay in PETG territory.
Is it food safe or dishwasher safe?: SUNLU does not market it as food safe. FDM parts are porous and not recommended for repeated food contact or dishwashing.
What nozzle temperature should I use?: Use PETG settings, typically around 230–250°C nozzle and a heated bed around 70–80°C. Check the spool label for SUNLU's recommended range.
Does it fit a standard printer?: Yes, it is 1.75mm filament and works on most FDM printers that accept 1.75mm and reach PETG temperatures.
Where is the SUNLU High-Speed Matte PETG Filament – 1.75mm, 1kg cheapest?: At PwnCNC, for $23.99, as of our latest check.